Table of Contents
Advertisement
Dell™ S2240L/S2340L Monitor User's Guide
About Your Monitor
Setting Up the Monitor
Operating the Monitor
Troubleshooting
Appendix
Notes, Cautions, Warnings
NOTE:
A NOTE indicates important information that helps you make better use of your computer.
CAUTION:
A CAUTION indicates potential damage to hardware or loss of data if instructions are not followed.
WARNING:
A WARNING indicates a potential for property damage, personal injury, or death.
Information in this document is subject to change without notice.
© 2012 Dell Inc. All rights reserved.
Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.
Trademarks used in this text: Dell and the DELL logo are trademarks of Dell Inc.; Microsoft and Windows are either trademarks or registered trademarks of Microsoft Corporation in
the United States and/or other countries. ENERGY STAR is a registered trademark of the U.S. Environmental Protection Agency. As an ENERGY STAR partner, Dell Inc. has determined
that this product meets the ENERGY STAR guidelines for energy efficiency.
Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any proprietary
interest in trademarks and trade names other than its own.
Model S2240Lc/S2340Lc
November 2012 Rev. A01
Advertisement
Table of Contents
Related Manuals for Dell S2240L
Summary of Contents for Dell S2240L
- Page 1 ENERGY STAR guidelines for energy efficiency. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own.
-
Page 2: About Your Monitor
Back to Contents Page About Your Monitor Dell™ S2240L/S2340L Monitor User's Guide Package Contents Product Features Identifying Parts and Controls Monitor Specifications Plug and Play Capability LCD Monitor Quality & Pixel Policy Maintenance Guidelines Package Contents Your monitor ships with all the components shown below. Ensure that you have received all the components and Contacting Dell™... - Page 3 Stand Base Velcro Strap Power Cable Adapter Cable VGA Cable Drivers and Documentation media Quick Setup Guide Product Information Guide...
-
Page 4: Product Features
Product Features The Dell™ S2240L/S2340L flat panel display has an active matrix, Thin-Film Transistor, Liquid Crystal Display. The monitor's features include: S2240L: 54.61 cm (21.5 inches) viewable area display. 1,920 x 1,080 resolution, plus full-screen support for lower resolutions. S2340L: 58.42 cm (23.0 inches) viewable area display. 1,920 x 1,080 resolution, plus full-screen support for lower resolutions. -
Page 5: Back View
Function buttons (For more information, see Operating the Monitor) Power On/Off button Power LED indicator Back View... -
Page 6: Side View
Security lock slot Use a security lock with the slot to help secure your monitor. Barcode serial number label Refer to this label if you need to contact Dell for technical support. Cable clip For cable management. Stand release button To release stand from monitor. -
Page 7: Bottom View
The OSD will only function in the normal operation mode. When any button except power button is pressed in Active-off mode, the following messages will be displayed: Activate the computer and monitor to gain access to the OSD. NOTE: Dell S2240L/S2340L monitor is ENERGY STAR®-compliance. -
Page 8: Pin Assignments
* Zero power consumption in OFF mode can only be achieved by disconnecting the main cable from the monitor. ** Maximum power consumption with max luminance and contrast. Pin Assignments 15-pin D-Sub connector Pin Number Monitor Side of the 15-pin Side Signal Cable Video-Red Video-Green Video-Blue... - Page 9 DDC clock HDMI Connector Pin Number 24-pin Side of the Connected Signal Cable T.M.D.S. Data 2- T.M.D.S. Data 2 Shield T.M.D.S. Data 2+ T.M.D.S. Data 1+ T.M.D.S. Data 1 Shield T.M.D.S. Data 1- T.M.D.S. Data 0+ T.M.D.S. Data 0 Shield T.M.D.S.
-
Page 10: Plug And Play Capability
Data (EDID) using Display Data Channel (DDC) protocols so that the system can configure itself and optimize the monitor settings. Most monitor installations are automatic. You can select different settings if required. Flat Panel Specifications Model number Dell S2240L monitor Dell S2340L monitor Screen type Active matrix - TFT LCD... -
Page 11: Resolution Specifications
Color Gamut 82 % (typical) ** 82 % (typical) ** * Based on estimation. ** [S2240L/S2340L] color gamut (typical) is based on CIE1976 (82 %) and CIE1931 (72 %) test standards. Resolution Specifications Model number Dell S2240L monitor Dell S2340L monitor... -
Page 12: Preset Display Modes
To avoid damage to the unit, user is strongly advised to use the original power adapter that comes packaged together with the monitor. Preset Display Modes The following table lists the preset modes for which Dell guarantees image size and centering: S2240L:... -
Page 13: Physical Characteristics
VESA, 1,920 x 1,080 67.5 60.0 148.5 Physical Characteristics The following table lists the monitor's physical characteristics: Model Number Dell S2240L monitor Dell S2340L monitor D-subminiature, blue connector; D-subminiature, blue connector; Connector type HDMI HDMI Analog: attachable, D-Sub, 15 pins, shipped... -
Page 14: Environmental Characteristics
In almost every case, these fixed pixels are hard to see and do not detract from display quality or usability. A display with 1 to 5 fixed pixels is considered normal and within competitive standards. For more information, see Dell Support site at: support.dell.com. -
Page 15: Caring For Your Monitor
Maintenance Guidelines Caring for Your Monitor CAUTION: Read and follow the safety instructions before cleaning the monitor. CAUTION: Before cleaning the monitor, unplug the monitor power cable from the electrical outlet. For best practices, follow the instructions in the list below while unpacking, cleaning, or handling your monitor: To clean your antistatic screen, slightly dampen a soft, clean cloth with water. -
Page 16: Setting Up The Monitor
Back to Contents Page Setting Up the Monitor Dell™ S2240L/S2340L Monitor User's Guide Attaching the Stand Connecting Your Monitor Organizing Your Cables Removing the Monitor Stand Attaching the Stand NOTE: The stand base and stand riser are detached when the monitor is shipped from the factory. -
Page 17: Connecting Your Monitor
a. Place the monitor on a soft cloth or cushion near the edge of desk. b. Align the stand assembly bracket to the monitor groove. c. Insert the bracket towards monitor until it locks in place. Connecting Your Monitor WARNING: Before you begin any of the procedures in this section, follow the Safety Instructions. - Page 18 Connecting the monitor with HDMI...
-
Page 19: Organizing Your Cables
Organizing Your Cables After attaching all necessary cables to your monitor and computer, organize all cables as shown below: 1. Insert cables into cable clip. 2. Tie the cables together using the velcro strap that shipped with your monitor. Removing the Monitor Stand... - Page 20 After placing the monitor panel on a soft cloth or cushion, complete the following steps to remove the base: Push the release button above the stand. While pushing the release button, pull the stand away from the monitor. Back to Contents Page...
-
Page 21: Operating The Monitor
Back to Contents Page Operating the Monitor Dell™ S2240L/S2340L Monitor User's Guide Using the Right Side Panel Controls Using the On-Screen Display (OSD) Menu Setting the Maximum Resolution Using the Tilt Power On the Monitor Press the button to turn on the monitor. - Page 22 Right side panel Key Description Use the Preset modes key to choose from a list of preset color modes. See Using the OSD Menu. Preset Modes Use the Brightness / Contrast key to direct access to the "Brightness" and "Contrast" control menu. Brightness / Contrast Use the Menu key to open the on-screen display (OSD).
-
Page 23: Accessing The Menu System
Use the Up key to adjust (increase ranges) items in the OSD menu. Use the Down key to adjust (decrease ranges) items in the OSD menu. Down Use the OK key to confirm your selection. Use the Back key to go back to the previous menu. Back Using the On-Screen Display (OSD) Menu Accessing the Menu System... - Page 24 Press the buttons to toggle between options in the Menu. As you move from one icon to another, the option name is highlighted. To select the highlighted item on the menu press the button again. Press the buttons to select the desired parameter. Press the button to enter the slide bar and then use the buttons, according to the indicators on the menu, to make your changes.
- Page 25 Brightness Allows you to adjust the brightness or luminance of the backlight. Press the key to increase brightness and press the key to decrease brightness (min 0 ~ max 100). Contrast Allows you to adjust the contrast or the degree of difference between darkness and lightness on the monitor screen. Adjust brightness first, and adjust contrast only if you need further adjustment.
- Page 26 Auto Adjustment allows the monitor to self-adjust to the incoming video signal. After using Auto Adjustment, you can further tune your monitor by using the Pixel Clock (Coarse) and Phase (Fine) controls under Image Settings. NOTE: Auto Adjust does not occur if you press the button while there are no active video input signals or attached cables. INPUT SOURCE Use the Input Source menu to select between different video signals that may be connected to your monitor.
- Page 27 Input Color Format Allows you to set the video input mode to: RGB: Select this option if your monitor is connected to a computer or DVD player using the HDMI cable or the HDMI to DVI adapter. YPbPr: Select this option if your DVD player supports only YPbPr output. Preset Modes Allows you to choose from a list of preset color modes.
- Page 28 Game: Loads color settings ideal for most gaming applications. Text: Loads color settings ideal for office environment. Warm: Increases the color temperature. The screen appears warmer with a red/yellow tint. Cool: Decreases the color temperature. The screen appears cooler with a blue tint. Custom Color: Allows you to manually adjust the color settings.
- Page 29 Adjusts the image ratio as Wide 16:9, 4:3, or 5:4. Aspect Ratio NOTE: Wide 16:9 adjustment is not required at maximum preset resolution 1,920 x 1,080. Horizontal Position Use the buttons to adjust image left and right. Minimum is '0' (-). Maximum is '100' (+). Vertical Position Use the buttons to adjust image up and down.
- Page 30 Language Allows you to set the OSD display to one of six languages: English, Spanish, French, German, Simplified Chinese, or Japanese. Menu Transparency Allows you to adjust the OSD background from opaque to transparent. Menu Timer Allows you to set the time for which the OSD remains active after you press a key on the monitor. Use the keys to adjust the slider in 1 second increments, from 5 to 60 seconds.
- Page 31 Enable (Default): Optimizes the performance of your monitor and provides a better customer experience. Disable: Disables the DDC/CI option and the following message appears on the screen. This feature will help reduce minor cases of image retention. LCD Conditioning...
- Page 32 If an image appears to be stuck on the monitor, select LCD Conditioning to help eliminate any image retention. Using the LCD Conditioning feature may take some time. LCD Conditioning feature cannot remove severe cases of image retention or burn-in. NOTE: Use LCD Conditioning only when you experience a problem with image retention.
- Page 33 Shortcut Key 1 User can select from "Preset Modes", "Brightness/Contrast", "Auto Adjust", "Input Source", "Aspect Ratio" and set as shortcut key. Shortcut Key 2 User can select from "Preset Modes", "Brightness/Contrast", "Auto Adjust", "Input Source", "Aspect Ratio" and set as shortcut key.
-
Page 34: Osd Warning Messages
Reset Personalize Allows you to restore shortcut key to the default setting. OSD Warning Messages When the monitor does not support a particular resolution mode you will see the following message: This means that the monitor cannot synchronize with the signal that it is receiving from the computer. See Monitor Specifications for the horizontal and vertical frequency ranges addressable by this monitor. - Page 35 You will see the following message before the DDC/CI function is disabled. When the monitor enters the Power Save mode, the following message appears: Activate the computer and wake up the monitor to gain access to the OSD. If you press any button other than the power button the following messages will appear depending on the selected input:...
-
Page 36: Setting The Maximum Resolution
If you do not see 1920 x 1080 as an option, you may need to update your graphics driver. Depending on your computer, complete one of the following procedures. If you have a Dell desktop or portable computer: Go to support.dell.com, enter your service tag, and download the latest driver for your graphics card. If you are using a non-Dell computer (portable or desktop): Go to the support site for your computer and download the latest graphic drivers. -
Page 37: Using The Tilt
Using the Tilt Tilt With the stand assembly, you can tilt the monitor for the most comfortable viewing angle. NOTE: The stand base is detached when the monitor is shipped from the factory. Back to Contents Page... -
Page 38: Troubleshooting
Back to Contents Page Troubleshooting Dell™ S2240L/S2340L monitor Self-Test Built-in Diagnostics In-Store Demo Common Problems Product Specific Problems WARNING: Before you begin any of the procedures in this section, follow the Safety Instructions. Self-Test Your monitor provides a self-test feature that allows you to check whether your monitor is functioning properly. If your monitor and computer are properly connected but the monitor screen remains dark, run the monitor self-test by performing the following steps: 1. -
Page 39: Built-In Diagnostics
4. This box also appears during normal system operation, if the video cable becomes disconnected or damaged. The monitor will enter Power Save Mode in 5 minutes if left at this state. 5. Turn off your monitor and reconnect the video cable; then turn on both your computer and the monitor. If your monitor screen remains blank after you use the previous procedure, check your video controller and computer, because your monitor is functioning properly. -
Page 40: In-Store Demo
2. Unplug the video cable(s) from the back of the computer or monitor. The monitor then goes into the self-test mode. 3. Press and hold the Button 1 and Button 4 on the right side panel simultaneously for 2 seconds. A gray screen appears. 4. - Page 41 Pixel that is permanently off is a natural defect that can occur in LCD technology. For more information on Dell Monitor Quality and Pixel Policy, see Dell Support site at: support.dell.com. Stuck-on Pixels LCD screen has bright Cycle power on-off.
-
Page 42: Product Specific Problems
Image retention from a Faint shadow from the Use the Power Management feature to turn off the monitor at all times when not in use (for static image left on the static image displayed more information, see Power Management Modes). monitor for a long period of appears on the screen Alternatively, use a dynamically changing screensaver. -
Page 43: Fcc Notices (U.s. Only) And Other Regulatory Information
Dell product catalog. Dell provides several online and telephone-based support and service options. Availability varies by country and product, and some services may not be available in your area. To contact Dell for sales, technical support, or customer service issues: Visit support.dell.com. - Page 44 Click Contact Us on the left side of the page. Select the appropriate service or support link based on your need. Choose the method of contacting Dell that is convenient for you. Back to Contents Page...