Package Contents ... 3 Introduction ... 4 Rear Panel Connections... 5 Front Panel LEDs ... 6 Features ... 7 Installation ... 8 Using the Configuration Wizard ... 9 Home > WAN... 9 Home > WAN... 10 Home > WAN > Static IP Address ... 11 Home >...
Page 3
Home > VoIP > Manage Features > Reject Incoming Call... 29 Home > VoIP > Manage Features > Block Outgoing Call ... 30 Home > DHCP ... 31 Home > Proxy DNS ... 33 Advanced > Virtual Server ... 34 Advanced >...
Auto-MDIX) Note: Using a power supply with a different voltage rating than the one included with the DVG-1402S will cause damage and void the warranty for this product. If any of the above items are missing, please contact your reseller.
Introduction The D-Link DVG-1402S High-Speed VoIP Router Links traditional telephony networks to IP networks with conventional telephony devices such as analog phones or fax machines. It can reduce long distance phone charges and deliver toll-quality voice communication over the IP network. This gateway provides two loop start Foreign Exchange Subscriber (FXS) ports and four LAN ports.
Rear Panel Connections Phone Connections Connect to your phones using standard phone cabling. All Ethernet Ports (WAN and LAN) are auto MDI/MDIX, meaning you can use either a straight-through or a crossover Ethernet cable. Auto MDI/MDIX LAN Ports Connect the Ethernet cable from computers on your LAN to...
Front Panel LEDs Status LED A blinking LED indicates the DVG-1402S is functioning properly. Power LED A solid light indicates a valid connection to the power supply. WAN LED An active LED The Hook LED will indicates a link has been telephone is off the established.
Consult with your Cable or DSL provider for proper installation of the modem Connect the Cable or DSL modem to the DVG-1402S VoIP Router (see the printed Quick Installation Guide included with your router.) Install the D-Link DFE-530TX+ adapter into a desktop computer. The four Ethernet LAN ports of the DVG-1402S are Auto MDI/MDIX and will work with both Straight-Through and Cross-over cable.
Using the Configuration Wizard Whenever you want to configure your network or the DVG-1402S, you can access the Configuration Menu by opening the web-browser and typing in the IP Address of the DVG-1402S. The DVG-1402S default IP Address is shown to the...
Dynamic Choose Dynamic IP Address to obtain IP Address information automatically from your ISP. This option should be selected if your ISP has not supplied you with an IP address. This option is commonly used for Cable modem services. Host Name MAC Address Clone MAC Address Home >...
Upstream Bandwidth Home > WAN > Static IP Address Static IP Address MAC address on the Broadband Router. You can use the “Clone MAC Address” button to copy the MAC address of the Ethernet Card installed by your ISP and replace the WAN MAC address with the MAC address of the router.
Page 13
IP Address Subnet Mask IP Gateway Address Primary DNS Address Secondary DNS Address Upstream Bandwidth to you by your ISP. You will need to enter in the IP address, subnet mask, gateway address, and DNS address(es) provided to you by your ISP. Each IP address entered in the fields must be in the appropriate IP form, which are four octets separated by a dot (x.x.x.x).
Choose PPPoE (Point to Point Protocol over Ethernet) if your ISP uses a PPPoE connection. Your ISP will provide you with a username and password. This option is typically used services. PPPoE Password Retype Password Service Name IP Address MAC Address Primary DNS Address Home >...
Page 15
Secondary DNS Address Upstream Bandwidth provided by your ISP This is an optional DNS Address entry to be used if the primary DNS fails. The upstream bandwidth can be set to suit the type of packets that the connection will be sending. The bandwidth can be maximized for voice packets and limited for data that requires less throughput.
LAN is short for Local Area Network. This is considered your internal network. These are the IP settings of the LAN interface for the DVG-1402S and may be referred to as Private settings. You may change the LAN IP address if needed. The LAN IP address is private to your internal network and cannot be seen on the Internet.
Home > VoIP All of the screens necessary to setup and configure the router to handle VoIP traffic are accessed from the screen shown below. To access any of the individual configuration screens, click on the corresponding radio-button and that screen will appear.
Page 18
Home > VoIP > Server Configuration The Router can be configured to handle voice signals over the Internet Protocol (Voice over IP − VoIP). The screen shown to the right, along with those on the following pages are used to configure your router to communicate with the devices that will send and receive telephone calls over...
Page 19
IP Address Domain Name Port Secondary SIP Server Outbound Proxy Service Domain URL Format User Parameter Caller ID Delivery Display CID Timer T2 Initial Unregister Register Expiration the SIP proxy server domain name. The phone will then use the domain name in Domain Name field as part of SIP URL but send and receive SIP messages through the SIP proxy server defined in the Service Domain field.
Provisioning is a function that automatically updates your DVG-1402S’s VoIP configuration by using a TFTP server located on the Internet. If you have accesses to such a service, you will need to know the URL and Proxy Address of the Provisioning Server.
NAT. STUN is useful if you need to use the DVG-1402S behind a modem or router that provides the connection to your ISP and then to the Internet and does not support symetric NAT. You will need access to a STUN server on the Internet and its IP address to use STUN on the DVG-1402S.
The Router can be configured to handle voice signals over the Internet Protocol (Voice Over IP − VOIP). Same Phone Number Index Phone Number Domain Name User Agent Port Authentication Name Password Retype Password To query the registration state of click Query. When the server responds you have the option to register or unregister.
The Router can be configured to handle voice signals over the Internet Protocol (Voice Over IP − VOIP). Phone Number User IP Address Port Home > VoIP > Peer to Peer The telephone number assigned to this entry Enter the IP address of the remote peer in this field. Enter the UDP port number the remote peer will use to make the connection in this field as to the proper port number, leave the default setting here.
The Router can be configured to handle voice signals over the Internet Protocol (Voice Over IP − VoIP). Index DTMF Method Payload Type Home > VoIP > Telephony Use this field to assign line 1 or line 2 telephone sockets (on the back of the router) to the information entered in the User Agent.
The Router can be configured to dial a specified telephone number when you enter a numerical dial code. For example, you could assign 22 to the telephone number 555-1234. Then you can dial that telephone number by entering 22. Index Dial Code Phone Number Home >...
Home > VoIP > Misc. Instead of adding additional lines to handle different telephone numbers, distinctive rings can be set to allow more than one telephone number to reach the same line. Calls coming in on different numbers on the same line can be identified by their distinctive ring pattern.
Home > VoIP > Misc. > Ring Cadence By using the Ring Cadence window, you can set up to 8 distinct ring patterns. The ring pattern of each distinct ring can be configured by setting the On and Off time. The amount of times that the ring pattern will repeat itself can also be set.
Home > VoIP > Misc. > Ring Default Rule The Ring Default Rule is set for inbound callers that are not defined by the Ring Rule. One Ring Default Rule can be set for each VoIP port. Use this pull-down menu to select a Ring Cadence for the Ring Ring Cadence Default Rule.
Home > VoIP > Misc. > Ring Rule You can use the Ring Rule window to assign Caller IDs to frequently received inbound calls. Any call that has been assigned a caller ID will have its ID number displayed on the receiver’s caller display.
Home > VoIP > Manage Features > Reject Incoming Call You can configure the router to reject incoming calls from particular telephone numbers by entering the telephone number in the screen shown below. Name PhoneNum Enter a name to identify the current entry. Enter the telephone number you want to block incoming calls from.
Home > VoIP > Manage Features > Block Outgoing Call You can configure the router to reject outgoing calls from particular telephone numbers by entering the telephone number in the screen shown below. Name PhoneNum Enter a name to identify the current entry. Enter the telephone number you want to block outgoing calls to.
Dynamic Host Configuration Protocol (DHCP) allows the gateway automatically obtain the IP address from a DHCP server on the service provider’s network. service provider assigns a global IP address from a pool of addresses available service provider. Typically address assigned has a long lease time, so it will likely be the same address each time the Router...
Page 33
as HTTP or FTP. First, the user must enable the Static DHCP function by clicking the corresponding Enabled radio button. Next the user must enter the host name and the IP address for that computer by entering the last numbers into the space provided in the IP Address field.
Advanced > Virtual Server To view the following window, click on the Advanced tab at the top of the window and then click the Virtual Server button to the left. The Virtual Server will allow remote users access to various services outside of their LAN through a public IP address, such as FTP (File Transfer Protocol) or HTTPS (Secure Web).
Page 36
These external services may be modified by clicking its corresponding edit icon, or they may be deleted by clicking the corresponding delete icon. Though there are seven fields available to configure the Virtual Server, in most cases, only the IP address of the Virtual Server will be needed for implementation.
Advanced > Filters Packet filtering is a basic security measure that should be used on any network that is exposed to a security risk. A packet filter system examines data packets and scrutinizes them in order to control network access. Filtering rules determine whether packets are...
passed through the Router from either side of the gateway. The rules are created and controlled by the network administrator and can be precisely defined. These rules are used to block access to the LAN from outside the network and/or to deny access to the WAN from within the network.
Protocol IP Address Subnet Mask Start Port/End Port All computers are uniquely identified by their MAC (Media Access Control) address. The following window will allow users to deny computers access to the Internet or only allow certain computers access to the Internet, based on their MAC address.
This Router comes equipped with a firewall. The Firewall configuration screen allows the Router to enforce specific predefined policies intended protect against common types of attacks. To configure the Router’s firewall, click the Advanced tab at the top of the screen and then the Firewall tab to the left.
RIP − Routing Information Protocol − specifies how routers exchange information. With RIP, routers occasionally exchange entire routing tables. You can select RIPv1 or RIPv2 by clicking the radio button under the Version heading, and then select On or Off by clicking the radio button under the State heading.
The Routing table, shown to the right, allows you to enter static routes between computers on both the WAN (Internet) and your LAN. IP Address Subnet Mask Gateway Interface Metric State Advanced > Routing Enter the IP Address of the subnet or device where packets are to be routed.
Advanced > NAT > NAT Configuration Network Address Translation (NAT) is a method by which the router translates between the IP address your ISP assigns to your account and the IP addresses assigned to the PCs on your LAN. NAT Interface IP Address NAT Interface Netmask NAT Function This field displays the current IP address of the LAN side of...
Advanced > NAT > Dynamic NAT Network Address Translation (NAT) is a method by which the router translates between the IP address your ISP assigns to your account and the IP addresses assigned to the PCs on your LAN. The Dynamic NAT entries are displayed below the Dynamic NAT...
Advanced > NAT > Static NAT Network Address Translation (NAT) is a method by which the router translates between the IP address your ISP assigns to your account and the IP addresses assigned to the PCs on your LAN. Index Local IP Address Global IP Address This is an index number that will be used to identify this NAT...
At this page, the DVG-1402S administrator can change the system password. There are two accounts that can access the Broadband Router’s Web-Management interface. They are admin and user. Admin has read/write access while user has read-only access. User can only view the settings but cannot make any changes.
Backup Restore Configuration File Restore Factory Default Settings Tools > System Click Backup to backup the configuration file to your local hard drive. To restore the configuration file click on Browse to search the local hard drive and locate the configuration file to be used for the configuration restoration.
You can update both the software and firmware of the Router. D-Link Support site for firmware updates at http://support.dlink.com. You can download firmware upgrades to your hard drive from the D-Link support site. Software Update Firmware Update File Name Tools > Firmware Enter the TFTP server address.
Tools > SNMP The SNMP IP Management Address is the address of the PC running the SNMP software from the DVG-1402S device. A defined set of variables (managed objects) is maintained by the SNMP agent and used to manage the device. Enter the IP address of PC that you want to use to manage the network.
Tools > Time The system time is the time used by the DVG-1402S for scheduling services. You can manually set the time, connect to a NTP (network time protocol) server or synchronize the time on the router with your PC. If an...
IP Address: WAN/Public IP Address Subnet Mask: WAN/Public Subnet Mask Default Gateway: WAN/Public Gateway IP Address LAN MAC Address: MAC address of the DVG-1402S IP Address: LAN/Private IP Address of the DVG-1402S Subnet Mask: LAN/Private Subnet Mask of the DVG-1402S...
Log Settings.The screen above displays the Traffic Statistics. Here you can view the amount of packets that pass through the DVG-1402S on both the WAN and the LAN ports. The traffic counter will reset if the device is rebooted or can be reset by...
Status > Diagnostics The Diagnostics window allows users to test the functionality of the router by executing a ping test. Enter the IP address of the Ping Target and then click Test.
Help The Help tab will give basic information referring to various screens locted in the Router. To view a specific section, click on its hyperlinked name. A new window of information will appear.
Technical Specifications Standards IEEE 802.3 IEEE 802.3u VPN Pass Through/ Multi-Sessions PPTP L2TP I PSec Device Management Web-Based- Internet Explorer v6 or later; Netscape Navigator v6 or later; or other Java-enabled browsers DHCP Server and Client Advanced Firewall Features NAT with VPN Passthrough (Network Address Translation) MAC Filtering IP Filtering URL Filtering...
Page 56
Status Physical Dimensions: L = 7.56 inches (192mm) W = 4.65 inches (118mm) H = 1.22 inches (31 mm) Power Input: Ext. Power Supply DC 12V, 1.5A Weight: 10.8 oz. (0.3kg) Warranty: 3 year (depends on D-Link global warranty policy)
Technical Support You can find software updates and user documentation on the D-Link website. D-Link provides free technical support for customers within the United States and within Canada for the duration of the warranty period on this product. U.S. and Canadian customers can contact D-Link technical support through our...