Installing The 5G Wwan Card - Dell Latitude 5550 Owner's Manual
Hide thumbs
Also See for Latitude 5550:
- Owner's manual (64 pages) ,
- Service manual (63 pages) ,
- Setup and specifications (23 pages)
Table of Contents
Advertisement
Steps
1. Remove the screw (M2x3) that secures the 5G WWAN-card bracket to the 5G WWAN card.
2. Lift the 5G WWAN-card bracket off the 5G WWAN card.
3. Remove the two screws (M2x3) that secure the 5G WWAN-card shield to the palm-rest and keyboard assembly.
4. Lift the 5G WWAN-card shield off the 5G WWAN card.
5. Disconnect the antenna cables from the 5G WWAN card.
6. Slide and remove the 5G WWAN card off the 5G WWAN-card slot on the system board.
Installing the 5G WWAN card
Prerequisites
If you are replacing a component, remove the existing component before performing the installation process.
About this task
NOTE:
The 5G WWAN card is available only on certain configurations. It is connected to the system with four antenna
cables.
The following images indicate the location of the 5G WWAN card and provide a visual representation of the installation
procedure.
62
Removing and installing Customer Replaceable Units (CRUs)
Advertisement
Table of Contents
