hit counter script
Bosch DICENTIS Installation Manual
  1. Manuals
  2. Brands
  3. Bosch Manuals
  4. Conference System
  5. DICENTIS
  6. Installation manual

Bosch DICENTIS Installation Manual

Hide thumbs Also See for DICENTIS:
Table of Contents

Advertisement

Quick Links

Download this manual
DICENTIS
Conference System
en
Installation manual

Advertisement

Table of Contents
loading

Related Manuals for Bosch DICENTIS

Summary of Contents for Bosch DICENTIS

  • Page 1 DICENTIS Conference System Installation manual...

  • Page 3: Table Of Contents

    Using a cable coupler to insert power locally 5.1.5 Using a cable coupler to switch the system on DICENTIS System cable assemblies DCNM-CBCON Connectors for DICENTIS cable DCNM-CBTK System Network Cable Toolkit DCNM-CB250 System installation cable DCNM-IDESKINT On-air & teleph. DCNM-IDESK...
  • Page 4 7.3.12 DCNM-FSL Flush language selector 7.3.13 Flush setups DCNM-IDESK / DCNM-IDESKVID Interpreter desk DICENTIS Microphones DCNM-MMDSP Anti-reflection foil DICENTIS Card holders 7.7.1 DCNM-NCH Name Card Holder 7.7.2 DCNM-DICH ID card holder for DCNM-D Installation Test 2023-02 (draft) | 4.3-draft | Bosch Security Systems B.V.

  • Page 5: Safety

    These instructions are supplied together with all equipment that can be connected to the mains supply. Safety precautions Some of the DICENTIS Conference System products are designed to be connected to the public mains network. To avoid any risk of electric shock, all interventions must be carried out with disconnected mains supply.
  • Page 6 Note: The FCC and IC Wireless statement applies to: – DCNM-MMD2 – DCNM-DVT – DCNM-DSL – DCNM-DE – DCNM-IDESK – DCNM-IDESKVID – DCNM-FIDP 2023-02 (draft) | 4.3-draft | Bosch Security Systems B.V. Installation manual...

  • Page 7: About This Manual

    DICENTIS About this manual | en About this manual The purpose of this manual is to provide information required for installing the DICENTIS Conference System. This installation manual is available as a digital document in the Adobe portable document format (PDF).
  • Page 8 | About this manual DICENTIS Release date Documentation version Reason – INT-TXO. 2023-03 V4.3 Added: – DCNM-FVP – DCNM-FSLP – DCNM-FAI – DCNM-FHH – DCNM-FHHC – DCNM-FIDP – DCNM-FICH. 2023-02 (draft) | 4.3-draft | Bosch Security Systems B.V. Installation manual...

  • Page 9: System Installation Overview

    It is advisable to participate in the DICENTIS Conference System training before you install, configure, prepare, and operate a DICENTIS Conference System. The DICENTIS Conference System is an IP based conference system which runs on an OMNEO compatible Ethernet network. It is used for distributing and processing audio, video and data signals.

  • Page 10: Typical System Setup

    Ethernet switch: – Ethernet switch with PoE on some ports. - Routes the system data via Ethernet. - Provides power to the DICENTIS devices via PoE. CAT‑5e Ethernet cable (minimum requirement). 2023-02 (draft) | 4.3-draft | Bosch Security Systems B.V.
  • Page 11 Only one DICENTIS device should be connected here. Powering switch: – Used to increase the number of DICENTIS devices connected to the system. Audio processor and powering switch: – Controls the system audio, routes audio from and to the system and supplies power to the DICENTIS devices.
  • Page 12 H.264 stream 3 Projector to show the active speaker 4 Video camera (Onvif Profile-S on the large screen compatible camera, Sony, Panasonic) 5 DICENTIS System server 6 L3 Ethernet switch 7 DCNM-APS2 8 DCNM-MMD2, displaying the active speaker on the device …..

  • Page 13: System Extension

    The DICENTIS Conference System is scalable from small to medium to large. This section describes what a small, medium and large system is and what the requirements are for these systems: A small to medium DICENTIS Conference System (see Typical system setup, page 10 ) consists – up to 450 DICENTIS nodes.
  • Page 14 If more than one subnet is required, two types of an ARNI must be used. – OMN-ARNIS (ARNI‑S OMNEO interface): The ARNI‑S is required for increasing the system size above 450 DICENTIS nodes. It supports up to 450 DICENTIS nodes in its subnet. It also acts as a DHCP server in its subnet. –...
  • Page 15 DICENTIS System installation overview | en Multi subnet DICENTIS Conference System The following figure illustrates a typical multi subnet DICENTIS Conference System with a total of 1500 DICENTIS devices. – The system is divided over four (4) subnets, where two (2) subnets having a maximum of 450 DICENTIS nodes and an OMN-ARNIS are connected.

  • Page 16: System Installation Design And Planning

    Notice! Make sure that the cable lengths and power consumptions do not exceed the specifications. Not doing so will result in malfunctioning at any moment of the DICENTIS Conference System and products. Caution! When the relative humidity is below 40%, synthetic materials can cause static discharge and result in malfunctions.
  • Page 17 The calculation tool is on the DVD supplied with the Audio processor and powering switch and is part of the DICENTIS software DCNM.iso file. The DCNM.iso file can be downloaded from the Bosch website at: https://licensing.boschsecurity.com/software...

  • Page 18: Hardware Requirements

    Warning: Please check thoroughly if your switch’s highest priority queue is label as #1 or e.g. #8, because this may differ per brand. Unfortunately this is not consistent over the different brands. Setting it wrong is worse than not having priority. 2023-02 (draft) | 4.3-draft | Bosch Security Systems B.V. Installation manual...
  • Page 19 Forwarding_delay = 30 seconds – Max_age = 22 seconds Diagnostics Link Layer discovery IEEE 802.1AB For network diagnoses using Network Docent. SNMP SNMP For network diagnoses using Network Docent. Bosch Security Systems B.V. 2023-02 (draft) | 4.3-draft | Installation manual...
  • Page 20 – Non-blocking backplane per switching port, i.e. 2 Gbit per port (e.g. 16 Gbps for an 8‑port router). – MAC address table of at least 1000 addresses per directly connected subnet. 2023-02 (draft) | 4.3-draft | Bosch Security Systems B.V. Installation manual...

  • Page 21: Power Supply Capacity Calculation Plan

    It is advisable to use the power calculation tool. The calculation tool is on the DVD supplied with the Audio processor and powering switch and is also part of the DICENTIS software DCNM.iso file, which can be downloaded from the Bosch website at: https:// licensing.boschsecurity.com/software...
  • Page 22 PoE switches, page 25 for more information. Ordering number Cable lengths DCNM-CB02-I 6.56 DCNM-CB05-I 16.40 DCNM-CB10-I 32.81 DCNM-CB25-I 82.02 Table 4.3: Cable types and lengths Rear view Figure 4.2: Audio processor and powering switch 2023-02 (draft) | 4.3-draft | Bosch Security Systems B.V. Installation manual...
  • Page 23 Max. power output (W) Max. devices Socket 1 (12) No power capacity Socket 2 (13) Socket 3 (15) Socket 4 (17) Socket 5 (19) Table 4.4: Power supply capacity DCNM‑APS2 / DCNM‑PS2 Bosch Security Systems B.V. 2023-02 (draft) | 4.3-draft | Installation manual...
  • Page 24 For socket 2, the cable power consumption of the cable does not need to be counted if only one device is connected to this output. The shortest redundant cable does not need to be counted. Refer to – Calculation using PoE switches, page 25 2023-02 (draft) | 4.3-draft | Bosch Security Systems B.V. Installation manual...

  • Page 25: Calculation Using Poe Switches

    System installation design and planning | en 4.3.2 Calculation using PoE switches Select one or more PoE Ethernet switches to supply power to the DICENTIS devices. Each DICENTIS device must be connected to an individual PoE enabled output of an Ethernet switch.
  • Page 26 | System installation design and planning DICENTIS Figure 4.6: Bottom view DICENTIS Interpreter devices (DCNM-IDESK / DCNM-IDESKVID) Figure 4.7: Topview view DICENTIS Flush base device (DCNM-FBD2) Item Description Network connector Network / PoE connector 2023-02 (draft) | 4.3-draft | Bosch Security Systems B.V.

  • Page 27: Redundancy Options

    DICENTIS System installation design and planning | en Redundancy options DICENTIS Conference Systems can be created with network redundancy. This ensures that the system will continue to work if: – a network cable is defective or accidentally disconnected. – one of the components fails.

  • Page 28: Redundant Cabling For Dcnm-Aps2/Dcnm-Ps2 Units

    The # sign shows the way the devices are counted. In the example below up to 19 (22 - 3 = 19) discussion devices can be connected. Figure 4.8: DICENTIS discussion devices connected with redundant cabling between DCNM-PS2 / DCNM- APS2 type units...
  • Page 29 DCNM-PS2 units. Notice! Rapid Spanning Tree Protocol (RSTP) must be enabled in the DICENTIS Conference System for these redundancy options to work correctly. Bosch Security Systems B.V. 2023-02 (draft) | 4.3-draft |...

  • Page 30: Redundant Server Pc

    3 DCNM-APS2 4 DCNM-PS2 5 DICENTIS cabling (redundant loop) For this option to work the DICENTIS Conference System has to be run in combination with EverRun Enterprise software from Stratus Technologies. For more information, refer to the Stratus Technologies website.

  • Page 31: Installation Material And Tools

    – to extend cables, – in a floor pod as break-out box, – as an interface between DICENTIS cable and “standard” CAT-5E cable combined with a separate power cable, – to insert power locally to the participant devices, – to switch the system on by using two cable couplers and a switch.

  • Page 32: Using A Cable Coupler To Extend A Cable

    Using a cable coupler as a break-out box The DICENTIS Cable coupler can be used in a floor pod as a break-out box, for example, if you want to connect temporary devices like a rostrum microphone. The cable coupler can be fixated using the screw holes (2.5 mm) or via a tie wrap through the recessed area.

  • Page 33: Using A Cable Coupler As An Interface Between Different Types Of Cable

    Using a cable coupler as an interface between different types of cable The cable coupler can be used as an interface between DICENTIS cable and “standard” CAT-5E cable, optionally combined with a separate power cable. This can be used, for example, when standard CAT-5E cabling coming from the technical room has to be connected with DICENTIS cable in the conference room.

  • Page 34: Using A Cable Coupler To Insert Power Locally

    (see drawing ‘Creating a tension relief’). Close the housing and fix the screw with torque 0.4 Nm. 2023-02 (draft) | 4.3-draft | Bosch Security Systems B.V. Installation manual...

  • Page 35: Using A Cable Coupler To Switch The System On

    – the ripple should be less than 200 mV pk-pk – maximum output current should not exceed 3.0 A (or limited to 3.0 A, because DICENTIS cables and devices have a maximum rating for this current) – Advice – It is strongly advised that the power supply has its own short circuit protection with a short circuit output current ranging from 4.3 to 5.0 A.
  • Page 36 Figure 5.7: Creating a tension relief, tie wrap prevents the power cables from being pulled out accidentally. Note: – The cable length is not allowed to exceed 100 m. – No more than 2 cable couplers can be used in one trunk. 2023-02 (draft) | 4.3-draft | Bosch Security Systems B.V. Installation manual...
  • Page 37 S1 or powering down the system. When the high power trunks are powered up, the switch of relay R2 will power relay 1 to keep the switch closed. Bosch Security Systems B.V. 2023-02 (draft) | 4.3-draft | Installation manual...

  • Page 38: Dicentis System Cable Assemblies

    | Installation material and tools DICENTIS DICENTIS System cable assemblies The DICENTIS System Cable Assemblies, terminated with connectors on both ends, are available in different lengths and are used to connect DICENTIS devices to each other. Ordering number Cable lengths DCNM-CB02-I 6.56...

  • Page 39: Dcnm-Cbcon Connectors For Dicentis Cable

    Power contact cavity (2 places) Housing Locking latch Signal contact cavity (8 Places) Refer to – DICENTIS System cable assemblies, page 38 – DCNM-CB250 System installation cable, page 41 – DCNM-CBTK System Network Cable Toolkit, page 40 Bosch Security Systems B.V.

  • Page 40: Dcnm-Cbtk System Network Cable Toolkit

    DICENTIS DCNM-CBTK System Network Cable Toolkit The system network cable toolkit is used to connect the DCNM-CBCON Connectors for DICENTIS cable, page 39 to the DCNM-CB250 System installation cable, page 41 or DICENTIS System cable assemblies, page 38 . Item Description Power wiring tool.

  • Page 41: Dcnm-Cb250 System Installation Cable

    The system installation cable, without connectors, is available in a length of 250 meters and is used for making your own system network cable. Refer also to the sections DCNM-CBCON Connectors for DICENTIS cable, page 39 and DCNM-CBTK System Network Cable Toolkit, page 40 .

  • Page 42: Dcnm-Ideskint On-Air & Teleph. Dcnm-Idesk

    | Installation material and tools DICENTIS DCNM-IDESKINT On-air & teleph. DCNM-IDESK The DCNM-IDESKINT On-air & teleph. DCNM-IDESK is an accessory that is connected to the DICENTIS Interpreter desk. It has 3 functions: – to control a booth on-air indicator outside the booth, –...
  • Page 43 LED. The input of the connector is used for the external telephone system, while the output is used for the external booth on-air LED. See the image and table below for reference. Figure 5.14: 8-pin Phoenix connector Bosch Security Systems B.V. 2023-02 (draft) | 4.3-draft | Installation manual...
  • Page 44 Table 5.8: Connection data Ferrules without insulating collar Cross section: 0.22 mm to 1.5 mm (according to DIN 46228-1) Length: 5 mm to 10 mm Table 5.9: Specifications for ferrules 2023-02 (draft) | 4.3-draft | Bosch Security Systems B.V. Installation manual...
  • Page 45 DICENTIS Installation material and tools | en Figure 5.15: Connection diagram Bosch Security Systems B.V. 2023-02 (draft) | 4.3-draft | Installation manual...

  • Page 46: Mechanical Installation Of Central Equipment

    – to route audio signals to/from devices, – to supply power to devices, – as an Ethernet switch to connect the PC and the participant and interpreting DICENTIS devices. The Powering switch is used to: – supply power to devices.
  • Page 47 Mains inlet, mains switch and fuse holder. Reset button. Ground switch (grounded or floating). Socket 1 without power. Socket 2 low power. 15, 17, 19 Socket 3, 4, 5 high power. Bosch Security Systems B.V. 2023-02 (draft) | 4.3-draft | Installation manual...
  • Page 48 Description 14, 16, 18, 20 Overload LED for sockets 2‑5: Green: Power OK. Red: Overload. Remove cable and wait a few seconds for the system to reset the overload. 2023-02 (draft) | 4.3-draft | Bosch Security Systems B.V. Installation manual...
  • Page 49 The unit extends 30 mm in front of the 19” mounting brackets when installed in a 19” rack system. Caution! Do not obstruct the airflow vents on the front side and rear left and right sides. Bosch Security Systems B.V. 2023-02 (draft) | 4.3-draft | Installation manual...

  • Page 50: System Server

    | Mechanical installation of Central Equipment DICENTIS System server The DICENTIS System server is provided with pre-installed and configured Windows Server® for Embedded Systems - Telecommunications (16 Core), pre-installed DICENTIS Conference System software, and pre-configured DHCP server. Note: please refer to the datasheet for the technical specifications.

  • Page 51: Dante Gateway

    Mechanical installation of Central Equipment | en How to install The DICENTIS System can be mounted under a desk, behind a display or in a rack. To install the system server: Connect the DICENTIS System to the DICENTIS system (i.e. DCNM-(A)PS2 or network switch) using a CAT-5E cable.
  • Page 52 DICENTIS Notice! In a large system (with over 450 DICENTIS nodes), the OMN-DANTEGTW must be installed in the VLAN where the OMN-ARNI-E is available. In large systems, the OMN-DANTEGTW becomes the clock master and the OMN-ARNI-E can distribute it to the other VLANs / OMN-ARNI-S devices.
  • Page 53 Dante and the OMNEO sides Alternating The AES70 identify function is – Disable the Identify function (e.g. yellow/green active via Docent). Rebooting the device will also cancel this function. Bosch Security Systems B.V. 2023-02 (draft) | 4.3-draft | Installation manual...
  • Page 54 Connect the Dante network port in the OMN-DANTEGTW to a network port in the Dante network. Connect the OMNEO network port in the OMN-DANTEGTW to the OMNEO network. Connect the mains supply. 2023-02 (draft) | 4.3-draft | Bosch Security Systems B.V. Installation manual...

  • Page 55: Mechanical Installation Of Contribution Devices

    The star configuration makes use of connectors underneath the devices, ensuring for a neat, tidy system installation, especially advantageous for TV coverage. To connect the system network cables to the DICENTIS devices (refer to the following figure): Insert the system network cable/connector (2).
  • Page 56 | Mechanical installation of Contribution Devices DICENTIS Figure 7.2: Bottom view DICENTIS devices (DCNM-D / DCNM-DVT / DCNM-DSL / DCNM-DE) Item Description Screw insert for fixed installation. 2x RJ45 connection input/output for system power cable. Cable guides. USB connector, for future use (DCNM-MMD / DCNM-MMD2 only).

  • Page 57: Dicentis Tabletop Devices

    DICENTIS Mechanical installation of Contribution Devices | en DICENTIS tabletop devices DCNM-MMD / DCNM-MMD2 Figure 7.3: Front, top, rear and side views Item Description 7” capacitive touch screen. LED strip. Two‑way loudspeaker. 3.5 mm stereo jack for headphone or headset with integrated microphone.
  • Page 58 Figure 7.4: Front, top, rear and side views Item Description Two‑way loudspeaker. Near Field Communication (NFC) reader. Chairperson priority button, microphone mute button, or microphone request button for second participant. Microphone request button. Voting buttons. 2023-02 (draft) | 4.3-draft | Bosch Security Systems B.V. Installation manual...
  • Page 59 (RED) 2014/53/EU. – Operating frequency is 13.56 MHz. Maximum field strength is -8.4 dBµA/m @ 10m. Refer to – DICENTIS System cable assemblies, page 38 – DCNM-CB250 System installation cable, page 41 Bosch Security Systems B.V. 2023-02 (draft) | 4.3-draft |...

  • Page 60: Dicentis Flush-Mounted Devices

    | Mechanical installation of Contribution Devices DICENTIS DICENTIS flush-mounted devices The flush-mounted devices create individual participant positions. They are ideal for use in permanent installations, because they offer great flexibility due to their modular set-up. You can select different flush-mounted devices depending on the functionalities you require.
  • Page 61 DICENTIS Mechanical installation of Contribution Devices | en DCNM-FPT >2 +0.5 R2.5 - 0.5 Bosch Security Systems B.V. 2023-02 (draft) | 4.3-draft | Installation manual...

Table of Contents