Table of Contents
Advertisement
7. Press down on the display bezel and snap the display bezel in place.
Next steps
1. Install the
display
hinge.
2. Install the
display
bezel.
3. Install the
display
assembly.
4. Install the
wireless
card.
5. Install the
base
cover.
6. Install the
SD
card.
7. Follow the procedure in
Camera module
Removing the camera module
Prerequisites
1. Follow the procedure in
2. Remove the
SD
card.
3. Remove the
base
cover.
4. Remove the
wireless
card.
5. Remove the
display
assembly.
6. Remove the
display
bezel.
7. Remove the
display
panel.
8. Remove the
display
hinge.
About this task
The following images indicate the location of the camera module and provides a visual representation of the removal procedure.
Steps
1. Using the pull tab, disconnect the camera cable from the camera module.
2. Using a plastic scribe, pry the camera module from the display assembly.
NOTE:
Start prying the camera module in a sequential order 1>2>3 as indicated on the display back cover.
66
Removing and installing components
After working inside your
Before working inside your
computer.
computer.
Advertisement
Table of Contents
