hit counter script
Miele CS 1021 Operating And Installation Instructions
  1. Manuals
  2. Brands
  3. Miele Manuals
  4. Hob
  5. CS 1021
  6. Operating and installation instructions
Miele CS 1021 Operating And Installation Instructions

Miele CS 1021 Operating And Installation Instructions

Hide thumbs Also See for CS 1021:
Table of Contents

Advertisement

Quick Links

Download this manual
Operating and installation instructions
Gas hobs
CS 1011
CS 1021
en - GB
To avoid the risk of accidents or
damage to the appliance it is
essential to read these
instructions before it is installed
and used for the first time.
M.-Nr. 07 172 900

Advertisement

Table of Contents
loading

Related Manuals for Miele CS 1021

Summary of Contents for Miele CS 1021

  • Page 1 Operating and installation instructions Gas hobs CS 1011 CS 1021 en - GB To avoid the risk of accidents or damage to the appliance it is essential to read these instructions before it is installed and used for the first time.
  • Page 2 Per questo se si vuole usare l’apparecchio in un paese diverso rivolgersi al servizio di assistenza tecnica Miele del paese in cui si intende usarlo.
  • Page 3 Gas-heated appliances Safety precautions to take if you smell gas ß Turn off the gas emergency control valve immediately. This is usually located near the gas meter. ß Eliminate all sources of ignition in a safe manner. Do not smoke, light cigarette lighters or matches. ß...

  • Page 4: Table Of Contents

    CS 1021 ........
  • Page 5 CS 1021 ........

  • Page 6: Guide To The Appliance

    Guide to the appliance CS 1011 a Wok burner b Pan support c Control knob d Display Display e In-operation indicator f Residual heat indicator...
  • Page 7 Guide to the appliance CS 1021 a Wok burner b Pan support c Control knob d Display Display e In-operation indicator f Residual heat indicator...
  • Page 8 Guide to the appliance Burner g Inner burner cap h Outer burner cap i Burner ring j Burner head k Ignition safety device l Ignitor m Burner base...

  • Page 9: Accessories Supplied

    Guide to the appliance Accessories supplied The accessories supplied with your CombiSet appliance as well as a range of optional ones are available to order (see "Optional accessories"). Wok ring The Wok ring can be used in instances where extra stability is required. It is particularly suitable for woks with a rounded base.

  • Page 10: Warning And Safety Instructions

    Warning and safety instructions Correct application This appliance complies with all This appliance is intended for relevant local and national safety domestic use only and must be used as requirements. Improper use of the described in these instructions. appliance can, however, present a Any other usage is not permitted and risk of both personal injury and could be dangerous.
  • Page 11 Warning and safety instructions Safety with children Packaging, e.g. cling film, polystyrene and plastic wrappings, This appliance is only intended for must be kept out of the reach of babies use by adults who have read these and young children. Danger of instructions.
  • Page 12 H 05 V V-F appliance could be damaged. Consult (pvc insulated), available from the Miele a qualified electrician if in any doubt. Spare Parts Department.
  • Page 13 Faulty components must only be Do not heat up unopened tins of replaced by genuine Miele original food on the hob as pressure will build spare parts. The manufacturer can only up in the tin, causing it to explode. This...
  • Page 14 Warning and safety instructions This appliance must not be set up or Do not use the appliance as a operated in the open air. resting place for anything else. The article could melt or catch fire if Make sure all the components of the residual heat is still present or if the gas burner have been correctly appliance is switched on by mistake.
  • Page 15 Contact the When using an electric socket near Miele Service Department. the appliance, care should be taken that the cable of the electrical appliance does not come into contact with the hot appliance.

  • Page 16: Caring For The Environment

    Caring for the environment Disposal of the packing Disposal of your old appliance material Electrical and electronic appliances often contain materials which, if The transport and protective packing handled or disposed of incorrectly, has been selected from materials which could be potentially hazardous to are environmentally friendly for human health and to the environment.

  • Page 17: Before Using For The First Time

    Before using for the first time Please stick the extra data plate for the appliance supplied with this documentation in the space provided in the "After sales service" section of this booklet. Cleaning for the first time ^ Remove any protective foil and stickers.

  • Page 18: Operation

    Operation Rapid ignition system The burner can only be switched on The appliance has a rapid ignition by pressing in the control and system with the following features: turning it anti-clockwise. It is switched off by turning the control – Rapid ignition without pressing und holding the control clockwise.
  • Page 19 Operation Switching on Regulating the flame Control the flame so that it does not spread out beyond the sides of the pan. As the outer part of the flame is much hotter than the centre, the tips of the flames should stay beneath the pan base.

  • Page 20: In-Operation Indicator And Residual Heat Indicator

    Operation In-operation indicator and Residual heat indicator When the gas hob is switched on, the in-operation indicator lights up. Once it has reached a certain temperature, the residual heat indicator also lights up. The in-operation indicator goes out when the gas hob is switched off. The residual heat indicator remains on until the gas hob is cool enough to touch.

  • Page 21: Pans

    Pans – Position the pan centrally on the pan Min. base diameter support so that it sits securely and Pots / pans = 15 cm cannot tip up. A little movement is quite normal and not a cause for Max. rim diameter concern.

  • Page 22: Wok Ring

    Pans Wok ring Small pan ring Use the small pan ring supplied when cooking with a small pan. The ring allows the pan to sit securely and prevents it from tipping. Use the wok ring supplied to give additional stability, especially to woks with a rounded base.

  • Page 23: Safety Features

    Safety features Thermo-electric ignition Safety cut-out This appliance has a thermo-electric If a burner has been used for an ignition safety device. If the flame goes unusually long period (approx. 4 out, for example if food has boiled over hours), it will switch off automatically. or if there is a sudden draught, and To use the burner again, turn the automatic re-ignition has been...

  • Page 24: Cleaning And Care

    Cleaning and care General notes To avoid damaging the surface or your hob, do not use: Under no circumstances use a – cleaning agents containing soda, steam cleaning appliance to clean alkaline, ammonia, acids or this appliance. The steam could chlorides, reach the electrical components and cause a short circuit.

  • Page 25: Stainless Steel Surfaces

    Cleaning and care Stainless steel surfaces Pan support, control knob Clean stainless steel surfaces using an Remove the pan support. Clean the E-Cloth or with a solution of warm water pan support and the control knob with a and a little washing-up liquid applied solution of warm water and a little with a soft sponge.

  • Page 26: Burner

    Cleaning and care Burner Reassemble the burner Do not clean any parts of the burner in a dishwasher. The burner should be dismantled and then cleaned by hand using a solution of warm water and a little washing-up liquid applied with a soft sponge. Parts of the burner that cannot be removed should be wiped clean with a damp cloth only.

  • Page 27: Problem Solving Guide

    Problem solving guide ... the in-operation indicator is Repairs to the gas and electrical flashing. components of this appliance must There is no supply of gas. only be carried out by a suitably qualified and competent person to Turn all the controls clockwise to ensure safety (Gas Safe registered position "ß".
  • Page 28 ..the ignitor on the burner does not spark. Check whether – the mains fuse has tripped. If it has, contact a qualified electrician or the Miele Service Department. – food deposits have lodged themselves between the ignitor and the burner cap. Remove any food deposits carefully (see "Cleaning and care").

  • Page 29: Optional Accessories

    These can be ordered via the internet on www.miele-shop.com or from the Miele Spare Parts Department (see back cover) or from your Miele dealer. Ceramic and stainless steel hob cleaner 250 ml Removes heavy soiling, limescale deposits and light...

  • Page 30: Safety Instructions For Installation

    Safety instructions for installation Ensure that the gas pipe and This appliance must be installed and electrical cable are installed in such a connected to services in way that they do not touch any parts of accordance with local and national the appliance which become hot.
  • Page 31 Safety instructions for installation Safety distance above the hob A minimum safety distance must be maintained between this appliance and the cooker hood above it. See the cooker hood manufacturer's operating and installation instructions for details. If the manufacturer's instructions are not available for the cooker hood, a minimum safety distance of at least 760 mm must be maintained.
  • Page 32 CS 1122 CS 1134 CS 1326 CS 1411 100 mm for CS 1012 CS 1013 150 mm for CS 1421 CS 1312 CS 1322 200 mm for CS 1034 not allowed 250 mm for CS 1011 CS 1018 CS 1021...
  • Page 33 Safety instructions for installation Safety distance when installing the appliance near a wall with additional niche cladding A minimum safety distance must be maintained between the worktop cut-out and any niche cladding to protect it from heat damage. If the niche cladding is made from a combustible material (e. g. wood) a minimum safety distance e of 50 mm must be maintained between the cut-out and the cladding.

  • Page 34: Appliance And Building-In Dimensions

    Appliance and building-in dimensions CS 1011 a Spring clamps b Front c Building-in depth d Building-in depth for the mains connection box with mains connection cable, L = 2000 mm e Building-in depth for the gas connection R 1/2 - ISO 7-1 (DIN 2999)
  • Page 35 Appliance and building-in dimensions CS 1021 a Spring clamps b Front c Building-in depth d Building-in depth for the mains connection box with mains connection cable, L = 2000 mm e Building-in depth for the gas connection R 1/2 - ISO 7-1 (DIN 2999)

  • Page 36: Preparing The Worktop

    Preparing the worktop ^ Make the worktop cut-out for one or more appliances as applicable. Remember to maintain the minimum safety distance from the back wall, as well as from any tall unit or side wall to the right or left of the hob. See "Safety instructions for installation".

  • Page 37: Installation Of Several Appliances

    Installation of several appliances When installing two or more appliances next to each other a spacer bar b must be used between each one. See “Fixing the spring clamps and spacer bars”. Worktop cut-out Worktop cut-out - two appliances - three appliances To calculate the cut-out width (D) required: Add up the widths of each appliance (e.g.
  • Page 38 Installation of several appliances a Spring clamps b Spacer bars c Gap between spacer bar and worktop d Sealing strip The illustration shows a worktop cut-out with spring clamps a and spacer bars b for 3 appliances. An additional spacer bar is required for each additional appliance. The position for securing each additional spacer bar will depend on the width of appliance B (288 mm / 380 mm / 576 mm).

  • Page 39: Fitting The Spring Clamps And Spacer Bars

    Fitting the spring clamps and spacer bars Wooden worktops Granite and marble worktops The screws are not required for granite or marble worktops. ^ Position the spring clamps supplied a and spacer bars b on the top edge of the cut-out in the positions ^ Position and secure the spring marked.
  • Page 40 Fitting the spring clamps and spacer bars ^ Apply silicone to the side edges and the lower edges of the spring clamps a and the spacer bars b. ^ Then fill gap e between the spacer bars and the worktop with silicone from the tube supplied.

  • Page 41: Installing / Removing The Appliance(S)

    Installing / removing the appliance(s) ^ Starting at the front, position the next Installing the appliance(s) appliance in the worktop cut-out. ^ Feed the connection cable down ^ Connect each appliance to the mains through the cut-out. (see "Electrical connection"). ^ Starting at the front, position the ^ Check that each appliance works appliance in the worktop cut-out.

  • Page 42: General Installation Tips

    General installation tips Tiled worktop Grout lines and the hatched area Do not use any sealant unless underneath the appliance must be expressly instructed to do so. The smooth and even. If they are not, the sealing strip under the edge of the top appliance frame will not sit flush with part of the appliance provides a the worktop and the sealing strip will...

  • Page 43: Electrical Connection

    Electrical connection Connection should be made via a All electrical work should be carried suitable isolator or a double pole fused out by a suitably qualified and spur connection unit which complies competent person, in strict with national and local safety accordance with current local and regulations and the on/off switch should national safety regulations (BS 7671...
  • Page 44 H 05 V V-F (pvc insulated), available from the Miele Spare Parts Department. The manufacturer cannot be held liable for damage which is the direct or indirect result of incorrect installation or connection.

  • Page 45: Gas Connection

    Please contact your dealer or the Miele Spare Parts Department for the Check with your local gas supplier appropriate conversion jets if about the type of gas and its necessary.
  • Page 46 Gas connection Connection The gas connection must be installed so that connection can be made either from inside or outside the kitchen unit, and the isolating valve must be easily accessible and visible (by opening one of the kitchen doors, if necessary). After installing the appliance the gas burners have to be set for local conditions.

  • Page 47: Conversion To Another Type Of Gas

    Conversion to another type of gas Screw in the new jets according to the Connection to the gas supply, or following table. conversion from one type of gas to another, should only be undertaken Jet table by an approved and registered gas installer in strict accordance with For UK and IE local and national safety and...

  • Page 48: Changing The Jets

    Conversion to another type of gas Changing the jets Disconnect the gas hob from the electricity supply by switching off at the socket and withdrawing the plug or by disconnecting the mains fuse. Turn off the gas supply. To change the jets, the burner securing screws must first be loosened and the upper section of the appliance removed.
  • Page 49 Conversion to another type of gas ^ Whilst counterholding it in place with To change the jet for the inner burner an SW 12 spanner, remove screw c from fitting b using an SW 8 spanner. ^ Whilst counterholding it in place with an SW 12 spanner, remove screw fitting b from fitting a with another SW 12 spanner.

  • Page 50: To Check The First Intake Of Air

    Conversion to another type of gas To check the first intake of air If it doesn't: ^ Loosen the retaining screw, adjust the air intake sleeve, and tighten the retaining screw again. ^ Finally secure the jets against inadvertent loosening with sealing wax.

  • Page 51: To Change The Small Jets

    Conversion to another type of gas ^ Using a small screwdriver, unscrew To change the small jets the two small jets a and b in the gas fitting. ^ Pull out the jets with a pair of pliers. ^ Fit the correct jets securely (see jet table).

  • Page 52: After Changing The Jets

    Conversion to another type of gas After changing the jets The flame must not go out on the lowest setting, or when the control is turned ^ Reassemble the burner parts in the quickly from a high to a low setting. reverse order.

  • Page 53: After Sales Service, Data Plate

    Please note that telephone calls may be monitored and recorded to improve our service. When contacting Miele, please quote the model and serial number of your appliance which are given on the data plate. N.B. A call-out charge will be applied for service visits where the problem could have been resolved as described in these instructions.
  • Page 56 Alteration rights reserved/ 4709 M.-Nr. 07 172 900 / 09...

This manual is also suitable for:

Cs 1011

Table of Contents