Table of Contents
Advertisement
Signal type and terminal connection
Video Input Connections
•
VGA (mini D-Sub 15-pin) – Analog video signal connection to a computer. Video only, no audio signal.
•
HDMI – High definition digital video and audio signal connection to a computer, streaming media player, Blu-ray player,
game console, etc.
•
DisplayPort – High definition digital video and audio signal connection to a computer.
Depending on the computer, you may need to manually set the computer's audio to output through the DisplayPort or HDMI
connection. Please refer to the computer's user manual.
The type of video connections that can be used to connect to a computer depends on the computer's display adapter.
The following table shows the typical factory preset signal timing for each connection type. Some display cards may not be able
to support the required resolution for proper image reproduction with the selected connection. The monitor will show the proper
image by automatically adjusting the factory preset timing signal.
<Major supported timings>
Resolution
Vertical Frequency
H
V
640
x
480
60 Hz
720
x
480
60 Hz
720
x
576
50 Hz
800
x
600
56/60 Hz
1024
x
768
60 Hz
1280
x
720
50/60 Hz
1280
x
960
60 Hz
1280
x
1024 60 Hz
1440
x
900
60 Hz
1680
x
1050 60 Hz
1920
x
1080 50/60 Hz
OOTEN
• When the selected monitor resolution is not a native panel resolution, the text contents appearance in the monitor
screen is expanded in a horizontal or vertical direction to show the non-native resolution to full screen. This
expansion is done by interpolated resolution technologies, which are normal and widely used in flat panel devices.
• Signal timings other than those listed in the table, and the screen position, size, and phase, may not be preserved for
the analog signal.
Connecting to a Computer with HDMI
•
Please use an HDMI cable with the HDMI logo.
•
It may take a moment for the signal to appear after turning on the computer.
•
Some display cards or drivers may not display an image correctly.
•
If the monitor's power is turned on after a connected computer is turned on, sometimes an image is not displayed. In this
case, please turn off the computer then turn it on again.
Connecting to a Computer with DisplayPort
•
Please use a certified DisplayPort cable.
•
It may take a moment for the signal to appear after turning on the computer.
•
When connecting a DisplayPort cable to a component with a signal conversion adapter, an image may not appear.
•
Some DisplayPort cables feature a locking function. When removing this cable, hold down the top button to release the lock.
•
If the monitor's power is turned on after a connected computer is turned on, sometimes an image is not displayed. In this
case, please turn off the computer then turn it on again.
Ootes
SVGA
XGA
720p
SXGA
1080p, Recommended (60 Hz)
Interlace signal is not supported.
English−19
Advertisement
Table of Contents
