Installation Instructions; Reversing The Door Swing; Before You Start; To Remove Doors - GE GTE21GTHWWGE Quick Use & Care

Refrigerators-top freezer

Hide thumbs

Table Of Contents

Table of Contents

Available languages

REVERSING THE DOOR SWING

BEFORE YOU START

• Unplug the refrigerator from its electrical outlet.

• Empty all door shelves, including the dairy compartment.

NOTICE: Do not let either door drop to the floor. To do so could damage the door stop.

TO REMOVE DOORS

1. Remove top hinge.

2. Lift off freezer door.

3. Remove the center hinge pin, hinge and gasket.

4. Lean the fresh food door forward and lift door off of lower hinge pin.

STAINLESS STEEL HANDLE

TRANSFER FREEZER DOOR HANDLE TO THE RIGHT SIDE OF

THE REFRIGERATOR DOOR AND THE REFRIGERATOR DOOR

HANDLE TO THE RIGHT SIDE OF THE FREEZER DOOR

6a. Remove handle screws from the top of fresh food door. Remove

handle screws from the bottom of freezer door.

7a. Loosen set screw on handle with the provided 1/8" wrench.

8a. Remove door handle.

9a. Change places between the handle fastener and plug button on

door front.

10a. Move the plug buttons on top and front of the door to fill the

now vacant holes.

11a. Transfer the door stop on the bottom of the door.

12a. Attach freezer handle to fresh food door with screws at top of

handle. Use 1/8" allen wrench to tighten set screw at bottom of

handle.

13a. Attach fresh food handle to freezer door with screws at bottom

of handle. Use the provided 1/8" allen wrench to tighten set

screw at top of handle.

14a. Attach badge on freezer door opposite the handle.

PLASTIC HANDLE ASSEMBLY

TRANSFER FREEZER DOOR HANDLE TO THE RIGHT SIDE OF

THE REFRIGERATOR DOOR AND THE REFRIGERATOR DOOR

HANDLE TO THE RIGHT SIDE OF THE FREEZER DOOR

6b. Remove handle screws from the top of fresh food door. Remove

handle screws from the bottom of freezer door.

7b. Remove door handle on fresh food door by sliding the handle

up off of the fastener. Remove door handle on freezer door by

sliding the handle down off of the fastener.

8b. Change places between the handle fastener and plug button on

door front.

9b. Move the plug buttons on top and front of the door to fill the

now vacant holes.

10b. Transfer the door stop on the bottom of the door.

11b. Attach freezer handle to fresh food door by sliding handle down

onto fastener and with screws at top of handle.

12b. Attach fresh food handle to freezer door by sliding handle up

onto fastener and with screws at bottom of handle.

13b. Attach badge on freezer door opposite the handle.