hit counter script
Download
Share
Print this page
Sony HMZ-T1 Startup Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. 3D Glasses
  5. HMZ-T1
  6. Startup manual

Sony HMZ-T1 Startup Manual

Head mounted display
Hide thumbs Also See for HMZ-T1:
1
2

Advertisement

Quick Links

Download this manual See also: Reference Manual
Head Mounted Display
Startup Guide
Before use, also refer to "Health Precautions" and
"Precautions" in the "Reference Guide."
© 2011 Sony Corporation Printed in Japan
HMZ-T1
1
Connect
1
Connect a playback equipment and a TV.
If your playback equipment has only one
HDMI
HDMI OUT jack and you also want to
IN
watch content from it on a TV, connect it
to the processor unit with the supplied
High-Speed HDMI cable, and connect
the processor unit to the TV with another
High-Speed HDMI cable (recommended
cable length: up to 5 m).
Notes
 Make sure to set "HDMI pass-through" to
"On" in the "General Setup" menu when
connecting a TV or other display device.
 Make sure that the system is in standby
mode when watching content on a
connected TV or other display device.
Playback Equipment
HDMI cable (supplied)
Blu-ray Disc
TM
player
HDMI
OUT
Game console
Enjoy Video in Four Steps
By design, the system will offer an impressive experience only after you take
a moment to adjust it to fit you well. Confirm the following steps and prepare
for use before enjoying content with this system.
1
Connect
2
Wear
Adjust the head mounted unit correctly.
Adjust the head mounted unit securely to your head, so that the
display stays directly in front of your eyes.
3
Set Up
Adjust the lens span correctly.
The distance between pupils varies from person to person. Wear the
The distance between
head mounted unit correctly and adjust the lens span to the correct
the centres of the pupils
width to align images on the left and right lenses and form images.
Wide
Narrow
4
Enjoy
What's in the box
GB
CT
Head mounted unit
Processor unit
HDMI cable (1)
4-297-825-61(1)
2
Connect the head mounted unit.
TV
Processor unit (Back)
Processor unit (Front)
3
Connect the mains lead and plug it in.
To mains
4
Turn the playback equipment on.
2
Wear
If you normally wear glasses or contact lenses, wear them as usual during use (with the exception of reading
glasses). Note that watching with bifocals may be less than optimal.
Accessories
Mains lead (1)
3
Set Up
Head mounted unit
All three "" marks and the horizontal
line intersect.
More than one of the "" marks and the
horizontal line do not intersect.
Wearing the unit will prevent you from seeing outside the display. Before you put it on, take a moment to review steps 2 – 4
(Wear, Set up, and Enjoy), so that you know the sequence of operations.
Adjustable Parts
Top headband strap
Bottom headband strap
Headband, release button
1
Pull out the headband.
On one side after another, hold the band release button
down and loosen the headband.
2
Turn the system on (
).
The power indicator on the processor unit is now
lit in green.
3
Bring the headband strap down around
the back of your head.
Lower the bottom headband strap to the base of your head.
4
Straighten the unit
on your head.
Straighten the front of the unit, so
that it is not tilted downward.
4
Enjoy
Follow the instructions displayed on the
screen for operations.
1
Select a display language (first time
only).
Press the
/
button to select a
language, and then press the MENU or
button.
2
Adjust the lens span.
Hold the lens span adjusters on both sides and slide
Control playback from compatible playback sources.
them together until you can see the screen clearly. After
adjustment, press the MENU button or
button.
Controlling Playback from the Unit
Note
 If you cannot see the screen clearly after lens span
adjustment, start over from "2 Wear. "
Fast-rewind
Hold the button down
3
to jump to the previous
Check display alignment.
chapter.
Confirm that all three "" marks and the horizontal line
intersect, and then press the MENU or
button.
It is acceptable if the "" marks and the horizontal line
intersect in a position other than the centre of the screen.
Volume
Note
Power on/standby
 If even one of the "" marks and the horizontal line do
Hold the button down to
not intersect, stop using the system. For details, see the
enter standby mode.
"Reference Guide. "
4
Follow the instructions displayed.
After reading the information, press the MENU or
button.
For details on configuring menu settings and attaching accessories, see the
"Reference Guide. "
5
Tighten the headband gently.
Gently tighten the headband, evenly on both sides. If the top
or bottom headband strap is too loose, adjust the length.
6
Adjust the position on your head.
Carefully adjust the unit left and right (and up and down, as
needed) to find the best position for viewing the centre of
the screens.
7
Tighten the headband securely.
Support the unit with both the forehead supporter and
the bottom headband strap. Do not support the unit
with the bridge of your nose.
Fasten it to keep it level on your head.
Note
 If the unit tips forward, lower the bottom headband strap to
balance the unit on your head.
8
Adjust the headphones.
Move the headphones forward, back, up, or down to position
them over your ears.
To remove the head mounted unit
Hold the band release buttons on both sides and pull the unit
forward as you lift it off.
Play
Fast-forward
Hold the button down to jump
to the next chapter.
Pause
Notes
 The system cannot be used for advanced
playback equipment control, such as menu
operations.
 Control using these buttons is only possible
when the "Control for HDMI" in "General Setup"
is set to "On" (default setting).
 Some playback equipment cannot be
controlled using the head mounted unit
buttons.

Advertisement

loading

Related Manuals for Sony HMZ-T1

Summary of Contents for Sony HMZ-T1

  • Page 1 Startup Guide What’s in the box Head mounted unit Before use, also refer to “Health Precautions” and “Precautions” in the “Reference Guide.” © 2011 Sony Corporation Printed in Japan HMZ-T1 Connect Connect a playback equipment and a TV. If your playback equipment has only one HDMI...
  • Page 2 四個步驟享受視頻 根據設計，只有在花一點時間按自己的需要調整系統之後，系統才能提供 令人印象深刻的觀賞經驗。以本系統享受影像內容之前，請確認下列步驟 並進行使用前的準備工作。 Head Mounted Display 入門指南 盒子裡有哪些東西 頭戴式顯示器螢幕 使用之前，另請參考“參考指南”中的“健康注意事項”與“注意事項”。 HMZ-T1 連 接 連接播放設備與電視機。 HDMI 如果您的播放設備只有一個HDMI OUT插 孔，而且您也想要在電視機上觀賞其 電視機 內容，請用隨附的高速HDMI纜線將其連 接到訊號處理器，然後用另一條高速 HDMI纜線（建議的纜線長度：最長5公 尺）將訊號處理器連接到電視機。 附註  連接電視機或其他顯示裝置時，務必要 訊號處理器（背面） 將“General Setup”選單中的“HDMI pass-through”設定為“On”。  在外接電視或其他顯示裝置上觀賞內容 時，請確認系統是處於待機模式中。 HDMI纜線（附件） 播放設備 Blu-ray Disc 播放機 HDMI 遊戲控制台 配戴 連接 配戴 正確的調整頭戴式顯示器螢幕。 調整頭戴式顯示器螢幕令其牢靠地戴在頭上，使得顯示位於眼睛的...