Table of Contents
Advertisement
28/83
Bosch Rexroth AG
About this Product
5.2.2
Coupling and Bellhousing
5.2.3
Servomotor MSK
5.2.4
Fan Unit LEM
5.2.5
Pump Foot
5.3
Product Identification
5.3.1
Motor-Pump Unit MPAS1
Type Plate
Type Code
LSA Control S.L. www.lsa-control.com comercial@lsa-control.com (+34) 960 62 43 01
(7) and radial compensation (8). They have a suction port (S) and a pressure
connection (P).
The pump and the motor are connected together with the coupling and the
bellhousing. Additionally, an optional pump foot is fastened on the bellhous‐
ing or the motor-pump unit is directly connected with the system.
Depending from the size of the motor-pump unit, different couplings and bell‐
housings are available.
For motor-pump units, MSK motors with smooth shaft are used.
The fan units LEM are used for increased performance of the servo motors.
The optional pump foot is fastened on the bellhousing of the motor-pump unit
and serves to assemble the motor-pump unit in the system.
The motor-pump unit can be identified by the type plate. The following exam‐
ple shows the type plate on a motor-pump unit MPAS1:
1
Part number
2
Serial number
3
Date of production
4
Type designation
Fig. 5-3:
Type plate motor-pump unit
The type code serves for general information of products. The de‐
livery capacity of single combinations must be determined over
the ordering system.
DOK-SYTROX-MPAS1******-IT01-EN-P
Rexroth Sytronix SvP 70xx Motor-Pump Unit MPAS1
Advertisement
Table of Contents
