Related Manuals for NEC MultiSync E203W
Summary of Contents for NEC MultiSync E203W
- Page 1 Desktop Monitor MultiSync E203W MultiSync E233WMi User’s Manual MODEL: L203QX, L235QU Please find your model name in the label on the rear side of the monitor.
-
Page 2: Table Of Contents
Index WARNING ............................English-1 CAUTION .............................English-1 Registration Information .......................English-2 Recommended use ........................English-4 Safety Precautions and Maintenance ..................English-4 Ergonomics ..........................English-5 Cleaning the LCD Panel .......................English-5 Cleaning the Cabinet ......................English-5 Quick Start ............................English-6 Controls ............................English-12 Specifications - E203W ........................English-16 Specifications - E233WMi ......................English-17 Features ............................English-18 Troubleshooting ..........................English-19 Manufacturer’s Recycling and Energy Information ...............English-20... -
Page 3: Warning
CAUTION: Please use the power cord provided with this display in accordance with the power cord table. If a power cord is not supplied with this equipment, please contact NEC. For all other cases, please use the power cord with the plug style that matches the power socket where the monitor is located. -
Page 4: Registration Information
WARNING: The Federal Communications Commission does not allow any modifications or changes to the unit EXCEPT those specified by NEC Display Solutions of America, Inc. in this manual. Failure to comply with this government regulation could void your right to operate this equipment. - Page 5 (4) The image shown in this user’s manual is indicative only. If there is inconsistency between the image and the actual product, the actual product shall govern. (5) Notwithstanding articles (3) and (4), NEC will not be responsible for any claims on loss of profit or other matters deemed to result from using this device.
-
Page 6: Recommended Use
For example, if an image was on the monitor for one hour and a residual image remains, the monitor should be turned off for one hour to erase the image. NOTE: As with all personal display devices, NEC DISPLAY SOLUTIONS recommends using a moving screen saver at regular intervals whenever the screen is idle or turning off the monitor when not in use. -
Page 7: Ergonomics
CORRECT PLACEMENT AND ADJUSTMENT OF THE MONITOR CAN REDUCE EYE, SHOULDER AND NECK FATIGUE. CHECK THE FOLLOWING WHEN YOU POSITION THE MONITOR: • For optimum performance, allow 20 minutes for the display to warm up. • Adjust the monitor height so that the top of the screen is at or slightly below eye level. Your eyes should look slightly downward when viewing the middle of the screen. -
Page 8: Quick Start
Quick Start For contents, please refer to the contents sheet. To attach the Base to the LCD stand: 1. Place monitor face down on a non-abrasive surface (Figure 1). NOTE: Handle with care when monitor facing down, for avoiding damage to the front control keys. 2. - Page 9 3. Place hands on each side of the monitor to tilt the LCD panel 20-degree angle and lift up 20° Tilt to the highest position. 4. Connect all cables to the appropriate connectors (Figure C.1). NOTE: Incorrect cable connections may cause abnormal operation, damage display quality/components of LCD module and/or shorten the module’s life.
- Page 10 8. Turn on the computer and the monitor by touching the power key on the front bezel (Figure E.1). 9. No Touch Auto Adjust automatically adjusts the monitor to optimal settings upon initial setup. For further adjustments, use the following OSD controls: •...
- Page 11 Screen Rotation Before rotating, disconnect power cord and all cables, then the screen must be raised to the highest level and tilt to avoid knocking the screen on the desk or pinching your fingers. To raise the screen, place a hand on each side of the monitor and lift up to the highest position (Figure RL.1). To rotate screen, place a hand on each side of the monitor screen and turn clockwise from landscape to portrait or counter- clockwise from portrait to landscape (Figure R.1).
- Page 12 Remove Monitor Stand for Mounting To prepare the monitor for alternate mounting purposes: 1. Disconnect all cables. 2. Place a hand on each side of the monitor and lift up to the highest position. 3. Place monitor face down on a non-abrasive surface (Figure S.1). NOTE: Handle with care when the monitor is facing down.
- Page 13 Mount Flexible Arm This LCD monitor is designed for use with a flexible arm. 1. Follow the instructions on how Remove Monitor Stand for Mounting to remove the stand. 2. Use the 4 screws removed from the stand or the specified screws to attach the arm to the monitor (Figure F.1). CAUTION: Use ONLY the screws (4 pcs) that were removed from the stand or the specified screws (Figure F.1) to avoid damage to the monitor or stand.
-
Page 14: Controls
Controls OSD (On-Screen Display) Control Functions 1. Basic functions of the touch keys on the front of the monitor – INPUT/RESET SELECT OSD Menu Not displaying on screen Selects input signal. Displays OSD. Shortcut to Brightness. Shortcut to Contrast (E203W). Shortcut to Volume (E233WMi). - Page 15 AUDIO (E233WMi only) Controls the volume of the speakers or headphones. To mute the speaker output, select Audio icon and touch “INPUT/RESET” key. BRIGHTNESS Adjusts the overall image and background screen brightness. To enter the ECO MODE, touch the “INPUT/RESET” key. ECO MODE OFF: Sets brightness variable from 0% to 100%.
- Page 16 OSD TOOL Selecting OSD TOOL allows you to get into the sub menu. See page 15. FACTORY PRESET Selecting Factory Preset allows you to reset all OSD control settings back to the factory settings except MUTE (E233WMi only), CARBON SAVINGS, CARBON USAGE, and SIGNAL INFORMATION. Individual settings can be reset by highlighting the control to be reset and touching the INPUT/RESET key.
- Page 17 OSD TOOL LANGUAGE OSD control menus are available in nine languages. OSD TURN OFF The OSD control menu will stay on as long as it is in use. In the OSD TURN OFF sub menu, you can select how long the monitor waits after the last touch of a key to shut off the OSD control menu. The preset choices are 10 - 120 seconds by 5 seconds step.
-
Page 18: Specifications - E203W
60 Hz to 75 Hz 1152 x 870* at 75 Hz 1440 x 900* at 60 Hz 1600 x 900 at 60 Hz..........NEC DISPLAY SOLUTIONS cites recommended resolution for optimal display performance. Active Display Area Landscape: Horiz.: 433.9 mm/17.1 inches Vert.:... -
Page 19: Specifications - E233Wmi
60 Hz to 75 Hz 1440 x 900* at 60 Hz 1680 x 1050* at 60 Hz 1920 x 1080 at 60 Hz........... NEC DISPLAY SOLUTIONS cites recommended resolution for optimal display performance. Active Display Area Landscape: Horiz.: 509.2 mm/20.0 inches Vert.:... -
Page 20: Features
Note: The manufacturing and operating carbon footprints are calculated by a unique algorithm developed exclusively by NEC for its monitors and are accurate at the time of printing. NEC reserves the right to publish updated carbon footprint values. DisplayPort: DisplayPort is designed to be the future-ready and scalable solution for high performance digital display connectivity. -
Page 21: Troubleshooting
NOTE: As with all personal display devices, NEC DISPLAY SOLUTIONS recommends using a screen saver at regular intervals whenever the screen is idle or turning off the monitor when not in use. -
Page 22: Manufacturer's Recycling And Energy Information
Dedicated recycling sites ensure that environmentally harmful components are properly handled and securely disposed. To ensure the best recycling of our products, NEC DISPLAY SOLUTIONS offers a variety of recycling procedures and gives advice on how to handle the product in an environmentally sensitive way, once it has reached the end of its life.