Table of Contents
Advertisement
4.9.8
Calibration menu
Menu item
Description
Time correction
This correction ( – 20 ... 0 ... + 20 s) is automatically
carried out once a week.
Example: deviation of the time by approximately
– 6 minutes per year
•
– 6 minutes a year is equal to
– 360 seconds a year
• 1 year = 52 weeks
•
– 360 seconds: 52 weeks
•
– 6.92 seconds per week
• Correction factor = + 7 s/week.
Table 23 Settings in the Calibration menu
5
Technical data
Ball pressure test temperature
Degree of pollution
Table 24 Technical data
6
Environmental protection and disposal
Old electrical and electronic appliances
This symbol means that the product must not be disposed
of with other waste, and instead must be taken to the waste
collection points for treatment, collection, recycling and
disposal.
The symbol is valid in countries where waste electrical and
electronic equipment regulations apply, e.g. "European Directive 2012/
19/EC on old electronic and electrical appliances". These regulations
define the framework for the return and recycling of old electronic
appliances that apply in each country.
As electronic devices may contain hazardous substances, it needs to be
recycled responsibly in order to minimize any potential harm to the
environment and human health. Furthermore, recycling of electronic
scrap helps preserve natural resources.
For additional information on the environmentally compatible disposal
of old electrical and electronic appliances, please contact the relevant
local authorities, your household waste disposal service or the retailer
where you purchased the product.
You can find more information here:
www.weee.bosch-thermotechnology.com/
HPC 410 – 6721832682 (2021/02)
7
GDPR), to fulfil our duty of product surveillance and for product safety
and security reasons (art. 6 (1) sentence 1 (f) GDPR), to safeguard our
rights in connection with warranty and product registration questions
(art. 6 (1) sentence 1 (f) GDPR) and to analyze the distribution of our
products and to provide individualized information and offers related to
the product (art. 6 (1) sentence 1 (f) GDPR). To provide services such as
sales and marketing services, contract management, payment handling,
programming, data hosting and hotline services we can commission and
transfer data to external service providers and/or Bosch affiliated
enterprises. In some cases, but only if appropriate data protection is
ensured, personal data might be transferred to recipients located
75 °C
outside of the European Economic Area. Further information are
2
provided on request. You can contact our Data Protection Officer under:
Data Protection Officer, Information Security and Privacy (C/ISP),
Robert Bosch GmbH, Postfach 30 02 20, 70442 Stuttgart, GERMANY.
You have the right to object, on grounds relating to your particular
situation or where personal data are processed for direct marketing
purposes, at any time to processing of your personal data which is based
on art. 6 (1) sentence 1 (f) GDPR. To exercise your rights, please contact
us via privacy.ttgb@bosch.com To find further information, please
follow the QR-Code.
8
A fault appears on the display of the user interface. The cause can be a
fault on the user interface, in a component, in an assembly or on the heat
source. Where the fault code is not shown within this manual please
consult the relevant heat source or component manual.
Structure of table headers:
Fault code - sub-code - [cause or fault description].
A01 - 811 - and A41 - 4051...4052 -
[DHW provision: thermal disinfection unsuccessful]
Test procedure/Cause
Check if water is possibly being
drawn from the DHW cylinder
constantly due to a leak or taps
being open
Check the position of the hot water
temperature sensor; it may be
attached incorrectly or suspended
in the air
If the DHW priority was deselected
and heating and DHW are running
in parallel, the boiler output may
not be sufficient
Check whether the heating coil in
the cylinder has been vented
completely
Check the connection pipes
between the boiler and cylinder,
and with the aid of the installation
instructions, ensure that they are
connected properly
Data Protection Notice
We, Bosch Thermotechnology Ltd., Cotswold Way,
Warndon, Worcester WR4 9SW, United Kingdom
process product and installation information,
technical and connection data, communication data,
product registration and client history data to provide
product functionality (art. 6 (1) sentence 1 (b)
Unit troubleshooting
Action
If water is being drawn constantly,
take action to stop this
Position the hot water
temperature sensor correctly
Set DHW heating to "priority"
Vent if necessary
Rectify any faults in the pipework.
Technical data
17
Hide quick links:
Advertisement
Table of Contents
