Table of Contents
Advertisement
Display of heating circuits
The designation assigned to the heating circuits depends on the slot of
the heating circuit module. The heating circuits are numbered according
to the sequence of slots. This means that the heating circuits at slot 1
appear in the display as heating circuit 01 and 02. The heating circuits at
slot 2 are displayed as 03 and 04. If a different module is inserted at a
slot, these heating circuits numbers are omitted. If a name has been
assigned to the heating circuit, this is displayed.
3.6.2
Calling up submenus
To select information on a system component:
▶ Tap the required position (function) on the display.
50 °C
on/off
30 %
Fig. 10 Selecting the system component
3.6.3
Toggling between displays (Retro mode)
You can change the display over to the old view with functions that were
available in the Control 8000 generation of controllers. If this toggle
function is active the symbol is highlighted. You can toggle between the
two displays by tapping the
Example of heating circuit
50 °C
on/off
30 %
Fig. 11 Heating circuit view, 8000 series
Off
Fig. 12 Heating circuit view, CSM/CFB series
Control 8311/8313 – 6720859790 (2020/02)
12:00
0010006538-002
symbol.
12:00
0010008705-002
Auto
12:00
0010008712-001
3.6.4
Modifying settings
1
7
8
9
C
+
4
5
6
-
1
2
3
.
0
OK
Off
6
Fig. 13 Modifying settings
[1]
Numerical values
[2]
Selection box
[3]
Scale
[4]
Cancel
[5]
Off/On
[6]
Save
Parameters can be changed in a number of different ways, depending on
the menu item.
• Changing numerical value
Numerical values can be changed by entering the number directly. A
keyboard opens when you tap the numerical field.
▶ Type in numerical values and confirm with
If the values you entered are invalid, the previous value will be
displayed.
• Scale
You can change the value by tapping the Plus and Minus keys.
• Selection box
Tap this field to open a selection box. Tap on the required parameter/
function to select it.
• The text field can be labelled ( Chapter 3.6, page 10).
• Off/On
Tap on the required parameter/function to select it.
To save the changes:
▶ Tap box for Save.
To cancel the operation:
▶ Tap box for Cancel.
If parameters are linked to settings, a temperature, for example, can only
be selected/modified if the function is set to On.
Fields that are not active are greyed out.
3.6.5
Labelling a text field
Some selection boxes contain an empty field which can be labelled by
entering text.
▶ Tap on the empty field.
A keyboard opens.
▶ Enter a suitable text for the length of the field.
▶ Confirm entry with
.
To save the changes:
▶ Tap box for Save.
To cancel the operation:
▶ Tap box for Cancel.
Operation of the control unit
2
3
-30
-22
-15
-7
°C
x
On
5
4
0010007715-001
.
0
11
Hide quick links:
Advertisement
Table of Contents
