Advertisement
Quick Links
Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions and
properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS.
USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE
DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.
1.
SAFETY INSTRUCTIONS
1.1
GENERAL SAFETY
WARNING! Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using this workstation.
!
WARNING! Use workstation on level and solid ground, preferably concrete. Avoid tarmacadam since the workstation may sink into the
!
surface.
Locate workstation in a suitable working area.
"
Keep the work area clean, uncluttered and ensure there is adequate lighting.
"
Keep the workstation clean and tidy in accordance with good workshop practice.
"
Keep children and unauthorised persons away from the working area.
"
Make sure that the cabinet is securely fitted to the wall before use.
"
DO NOT use the workstation for any purpose other than that for which it is designed.
#
DO NOT undertake work on the workstation without the workpiece being adequately secured. Use clamps or a vice (not included) to secure
#
the workpiece. Available from your Sealey dealer.
DO NOT use the workstation out of doors.
#
DO NOT get the workstation wet or use in damp or wet locations or areas where there is condensation.
#
DO NOT clean the workstation with any solvents which may damage the paint surface or the protective coating on the wooden top.
#
Note! The assembly of this product will require assistance.
2.
INTRODUCTION AND SPECIFICATIONS
2.1
Workstation consisting of wooden worktop bench and wall mounting cabinet. Features one drawer, one deep cupboard, two slim
cupboards, metal pegboard and open storage space with a removable shelf. All cupboards are lockable Supplied with 20 hanging
hooks. Ideal for keeping all tools close to hand while at work.
2.2
Size - Workbench (H x D x W): 860 x 600 x 1200mm
Size
- Cabinet (H x D x W): 610 x 200 x 1200mm
INSTRUCTIONS FOR:
WORKSTATION 1.2 MTR WITH DRAWER &
CUPBOARD
AP2060
:
MODEL
AP2060 - 1 - 010507
Advertisement
Related Manuals for Sealey AP2060
Summary of Contents for Sealey AP2060
- Page 1 AP2060 MODEL Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions and properly maintained, give you years of trouble free performance. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS.
- Page 2 It may be easier to lay the unit down on its side with the shelf support slot is facing left. front for this step of the assembly. AP2060 - 1 - 010507...
- Page 3 (10 attached in step 6). them together as show in the diagram above, making sure that the bottom lip of each panel is facing inwards. Then place the wooden base inside of the shelf. AP2060 - 1 - 010507...
- Page 4 18 shown above. the double bend lip is facing the front and that 19 and 22 have the lipped edge facing each other and the same with 20 and 21. AP2060 - 1 - 010507...
- Page 5 Parts support is available for this product. To obtain a parts listing and/or diagram, please log on to www.sealey.co.uk, email sales@sealey.co.uk or phone 01284 757500. NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.