Identifier
Status
WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Identifier
Status
Procedure
CAUTION:
To avoid damaging the wireless card, do not place any cables under it.
1
Connect the antenna cables to the wireless card.
The following table provides the antenna-cable color scheme for the wireless card supported by your computer.
Table 2. Wireless card color scheme
Connectors on the wireless card
Main (white triangle)
Auxiliary (black triangle)
2
Align and place the wireless-card bracket on the wireless card.
3
Slide the wireless card at an angle into the wireless-card slot.
4
Replace the screw (M2x2.5) that secures the wireless-card bracket and the wireless card to the system board.
GUID-94E88AEC-6F12-4B0E-AA6A-B28D8E200225
Released
Replacing the wireless card
computer. After working inside your computer, follow the instructions in
GUID-18307A13-F844-43CC-B63B-5020DF4026B5
Released
www.dell.com/
Antenna-cable color
White
Black
Replacing the wireless card
35
After working inside
71