Do not apply pressure to the surface of the battery • Do not bend • Do not use tools of any kind to pry on or against the battery • If a battery cannot be removed within the constraints above, please contact Dell technical support وتركيبها المكونات إزالة...
3. Remove the screw that secures the solid-state drive assembly to the system board [1, 2]. 4. Lift and slide the solid-state drive assembly from the system board [3]. 5. Remove the screw that secures the solid-state drive to the solid-state drive bracket [1, 2, 3]. 6.
3. Remove the screw that secures the solid-state drive to the system board. 4. Remove the thermal pad from the SSD. NOTE: The thermal pad is applicable only for a PCIe SSD card. Installing the Solid-State Drive (full-length) 1. Adhere the thermal pad to the solid-state drive. NOTE: The thermal pad is applicable only for a PCIe SSD card.
a. system board b. screws 4. Flip the system board over, then lift the audio daughter board from the system board. a. audio daughter board Installing the audio daughter board 1. Align the screw holes on the audio daughter board with the screw holes on the system board. 2.
display assembly 3. Carefully turn the display hinges at an angle. Figure 1. Turning the display hinge a. display assembly b. display hinges (2) 4. Slide and lift the antenna cover away from the display assembly. Figure 2. Removing the antenna cover a.
Removing the display hinges 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove the: base cover battery WLAN Card display assembly antenna cover 3. Peel off the tape to access the screws on the display hinges. a. tape b.
2. Replace the screws that secure the display hinges to the display assembly. 3. Adhere the tape to the display hinges. 4. Install the: a) antenna cover b) display assembly c) wireless card d) battery e) base cover 5. Follow the procedures in After Working Inside Your Computer. Removing the antenna module 1.
b) antenna cover c) display assembly d) wireless card e) battery f) base cover 5. Follow the procedures in After Working Inside Your Computer. Removing the palm-rest assembly 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove the: base cover battery memory modules...
Page 29
j) memory modules k) battery l) base cover 3. Follow the procedures in After Working Inside Your Computer. وتركيبها المكونات إزالة...
System Time/Date والوقت التاريخ ضبط إمكانية لك يتيح BIOS Version إصدار يعرض BIOS. Product Name المنتج اسم يعرض Dell Precision M3800 ( الافتراضي الإعداد Service Tag الخدمة رمز يعرض Asset Tag الأصل رمز يعرض الافتراضي الإعداد بدون CPU Type نوع...