Related Manuals for NEC AccuSync AS221F
Summary of Contents for NEC AccuSync AS221F
- Page 1 User’s Manual Desktop Monitor AccuSync AS221F AccuSync AS241F MODEL: AS221F, AS241F Please find your model name in the label on the rear side of the monitor.
-
Page 2: Table Of Contents
AS241F ................25 OSD Controls List Appendix A Picture ................27 Setup ..................28 Sound .................27 Information ................28 Manufacturer’s Recycling and Energy Information Appendix B Disposing of your old NEC product ........30 WEEE Mark (European Directive 2012/19/EU and amendments) ..............30 Energy Saving ..............30... -
Page 3: Important Information
(4) The image shown in this user’s manual is indicative only. If there is inconsistency between the image and the actual product, the actual product shall govern. (5) Notwithstanding articles (3) and (4), NEC will not be responsible for any claims on loss of profit or other matters deemed to result from using this device. -
Page 4: Registration Information
The Federal Communications Commission does not allow any modifications or changes to the unit EXCEPT those specified by NEC Display Solutions of America, Inc. in this manual. Failure to comply with this government regulation could void your right to operate this equipment. - Page 5 Recommended Use Safety Precautions and Maintenance FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWINN WHEN SETTINN UP AND USINN THE LCD COLOR MONITOR: About the Symbols To ensure safe and proper use of the product, this manual uses a number of symbols to prevent injury to you and others as well as damage to property.
- Page 6 WARNING Handle the power cord with care. Damaging the cord could lead to fire or electric shock. • Do not place heavy objects on the cord. • Do not place the cord under the monitor. • Do not cover the cord with a rug, etc. •...
- Page 7 CAUTION Do not climb on the monitor or the table where the monitor is installed. Do not install the monitor on a wheeled table if the wheels on the table have not been properly locked. The monitor may fall causing damage to the monitor or personal injury.
- Page 8 OTEE: As with all personal display devices, NEC DISPLAY SOLUTIONS recommends using a moving screen saver at regular intervals whenever the screen is idle, or turn off the monitor when not in use.
- Page 9 Ergonomics CORRECT PLACEMENT AND ADJUSTMENT OF THE MONITOR CAN REDUCE EYE, SHOULDER, AND NECK FATINUE. CHECK THE FOLLOWINN WHEN YOU POSITION THE MONITOR: To realize the maximum ergonomics benefits, we recommend the following: • For optimum performance of the monitor, allow 20 minutes for warming up. Avoid reproduction of still patterns on the monitor for long periods of time to avoid image persistence (after image effects).
-
Page 10: Product Features
oteE: The manufacturing and operating carbon footprints are calculated by a unique algorithm developed exclusively by NEC for its monitors and are accurate at the time of printing. NEC reserves the right to publish updated carbon footprint values. Low Blue Light •... -
Page 11: Installation
Installation Chapter 1 This Chapter Includes: > “Parts Name and Functions” on page 10 > “Connections” on page 12 > “Setup” on page 13 > “Flexible Arm Installation” on page 15 English−9... -
Page 12: Parts Name And Functions
Parts ame and Functions Control Panel Item Function A LED Indicates that the power is on. Turns the monitor on and off. B Power C EXIT button When the OSD menu is not displayed on the screen, it opens the VIDEO INPUT menu (When selecting AUTO input, the monitor selects the active signal input automatically). -
Page 13: Terminal Panel
Terminal Panel Security Slot Rating Label AC IN Connector B DisplayPort IN D VNA IN E Audio IN C HDMI IN F Headphone AC I Connector Audio I Connects with the supplied power cord. Audio signal input from external equipment such as a computer or player. -
Page 14: Connections
Connections Video Input Connections • VNA (mini D-Sub 15-pin) – Analog video signal connection to a computer. Video only, no audio signal. • HDMI – High definition digital video and audio signal connection to a computer, streaming media player, Blu-ray player, game console, etc. - Page 15 Connecting to a Computer with DisplayPort • Please use a DisplayPort cable with the DisplayPort compliance logo. • It may take a moment for the signal to appear after turning on the computer. • When connecting a DisplayPort cable to a component with a signal conversion adapter, an image may not appear. •...
- Page 16 To connect the monitor to your system, follow these instructionsE: OTEE: Make sure to read “Recommended Use” on page 3 before installation. 1. Turn off the power to your computer. 2. Place the monitor face down on a non-abrasive surface. 3.
- Page 17 CAUTIOE: Tilt Flexible Arm Installation This monitor is designed for use with a flexible arm. Contact NEC for more information. Follow the instructions provided by the manufacturer of the display mount. Remove the monitor stand before mounting. CAUTIOE: To meet the safety requirements, the monitor must be mounted to an arm that supports the weight of the monitor.
- Page 18 Mount the Flexible Arm Using four screws that meet the specifications listed below, attach the arm to the monitor. Screw (M4) Washer Thickness of Mounting bracket and Bracket washer Unit 8 - 10 mm 100 mm 100 mm Figure F.1 CAUTIOE: •...
-
Page 19: Basic Operation
Basic Operation Chapter 2 This Chapter Includes: > “Using the OSD (On-Screen Display) Controls” on page 18 > “Changing the Input” on page 19 > “Power management function LED indicator patterns” on page 19 English−17... -
Page 20: Using The Osd (On-Screen Display) Controls
Using the OSD (On-Screen Display) Controls OSD (On-Screen Display) control button on the front of the monitor function as follows: • To access the OSD menu, press the ETER button. PICTURE BRIGHTNESS SOUND ECO MODE SETUP CONTRAST INFOMATION COLOR USER GREEN BLUE SHARPNESS... -
Page 21: Changing The Input
Changing the Input Changing the Input To change the signal input, press the EXIT button. OTEE: When selecting AUTO input, the monitor selects the active signal input automatically. For HDCP Content HDCP is a system for preventing illegal copying of video data sent over a digital signal. If you are unable to view material via the digital inputs, this does not necessarily mean that the monitor is not functioning properly. -
Page 22: Image Persistence
Troubleshooting Chapter 3 This Chapter Includes: > “Screen Image and Video Signal Issues” on page 21 > “Hardware Issues” on page 22 > “Image Persistence” on page 22 English−20... - Page 23 Screen Image and Video Signal Issues o picture • Make sure the signal cable is fully connected to the monitor and the computer. • Make sure there is no DisplayPort converter adapter connected. The monitor does not support DisplayPort converter adapter. •...
- Page 24 OTEE: As with all personal display devices, NEC DISPLAY SOLUTIONS recommends using a moving screen saver at regular intervals whenever the screen is idle, or turning off the monitor when not in use.
-
Page 25: As241F
Specifications Chapter 4 This Chapter Includes: > “AS221F” on page 24 > “AS241F” on page 25 English−23... - Page 26 AS221F Monitor Specifications AccuSync AS221F otes LCD Module Diagonal: 54.61 cm/21.5 inches Active matrix; thin film transistor (TFT) liquid crystal Viewable Image Size: 54.61 cm/21.5 inches display (LCD); 0.248 mm dot pitch; 250 cd/m white Native Resolution: 1920 x 1080 60 Hz luminance;...
- Page 27 AS241F Monitor Specifications AccuSync AS241F otes LCD Module Diagonal: 60.47 cm/23.8 inches Active matrix; thin film transistor (TFT) liquid crystal Viewable Image Size: 60.47 cm/23.8 inches display (LCD); 0.275 mm dot pitch; 250 cd/m white Native Resolution: 1920 x 1080 60 Hz luminance;...
-
Page 28: Setup
OSD Controls List Appendix A This Chapter Includes > “Picture” on page 27 > “Sound” on page 27 > “Setup” on page 28 > “Information” on page 28 Default values can be provided on request. English−26... - Page 29 Picture Picture Menu BRINHTNESS Adjusts the overall image and background screen brightness. ECO MODE Decreases the amount of power consumption by reducing the brightness level. Sets brightness variable from 0% to 100%. 1 (10% POWER SAVINNS) Sets the brightness variable range from 0% to 80%. 2 (30% POWER SAVINNS) Sets the brightness variable range from 0% to 40%.
- Page 30 Setup Setup Menu EXPANSION Sets the Zoom method. FULL The image is expanded to full screen regardless of the resolution. ASPECT The image is expanded without changing the aspect ratio. RESPONSE IMPROVE Turns the [RESPONSE IMPROVE] function [ON] or [OFF]. This function may reduce blurring that occurs in some moving images.
- Page 31 > “WEEE Mark (European Directive 2012/19/EU and amendments)” on page 30 NEC DISPLAY SOLUTIONS is strongly committed to environmental protection and sees recycling as one of the company’s top priorities in trying to minimize the burden placed on the environment. We are engaged in developing environmentally-friendly products, and always strive to help define and comply with the latest independent standards from agencies such as ISO (International Organisation for Standardization) and TCO (Swedish Trades Union).
-
Page 32: Weee Mark (European Directive 2012/19/Eu And Amendments)
Dedicated recycling sites ensure that environmentally harmful components are properly handled and securely disposed. To ensure the best recycling of our products, NEC DISPLAY SOLUTIONS offers a variety of recycling procedures and gives advice on how to handle the product in an environmentally sensitive way, once it has reached the end of its life.