Related Manuals for Dell S2419H
Summary of Contents for Dell S2419H
- Page 1 User’s Guide Dell S2419H/S2419HN/S2419NX/ S2719H/S2719HN/S2719NX Model No.: S2419H/S2419HN/S2419NX/S2719H/S2719HN/ S2719NX Regulatory model: S2419Hc/S2419Nc/S2719Hc/S2719Nc...
- Page 2 Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden. Trademarks used in this text: Dell and the DELL logo are trademarks of Dell Inc.; Microsoft and Windows are either trademarks or registered trademarks of Microsoft. Corporation in the United States and/or other countries, Intel is a registered trademark of Intel Corporation in the U.S.
-
Page 3: Table Of Contents
Contents About your monitor ..............5 Package contents .................. 5 Product features ..................6 Identifying parts and controls ............. 7 Monitor specifications ................10 Plug and play capability ..............19 LCD monitor quality and pixel policy ..........19 Maintenance guidelines ..............19 Setting up the monitor ............20 Connecting the stand ................ - Page 4 Troubleshooting ..............39 Self-Test ....................39 Built-in diagnostics ................40 Common problems ................41 Product-specific problems ..............43 Appendix .................44 FCC notices (U.S. Only) and other regulatory information ..44 Contacting Dell ................... 44...
-
Page 5: About Your Monitor
Package contents Your monitor ships with the components shown below. Ensure that you have received all the components and see Contacting Dell for more information if something is missing. NOTE: Some items may be optional and may not ship with your monitor. Some features or media may not be available in certain countries. -
Page 6: Product Features
The Dell S2419H/S2419HN/S2419NX/S2719H/S2719HN/S2719NX flat panel display has an active matrix, Thin-Film Transistor (TFT), Liquid Crystal Display (LCD), anti- static, and LED backlight. The monitor features include: S2419H/S2419HN/S2419NX: 60.47 cm (23.8 inch) viewable area display ∞ (measured diagonally). 1920 x 1080 resolution, plus full-screen support for lower resolutions. -
Page 7: Identifying Parts And Controls
Identifying parts and controls Front view Control buttons Label Description Function buttons (For more information, see Operating your monitor) Power On/Off button About your monitor... -
Page 8: Back View
(security lock not included). Regulatory label (including Lists the regulatory approvals. Refer to Barcode serial number and this label if you need to contact Dell for Service Tag label) technical support. The Dell service tag is used for Dell warranty and customer service management purposes and for records of the base system. -
Page 9: Bottom View
Bottom view Bottom view without monitor stand (S2419H/S2719H) Bottom view without monitor stand (S2419HN/S2419NX/S2719HN//S2719NX) Label Description Speakers Speakers Power-adapter port To connect the monitor power cable using a 12V DC adapter. HDMI1 port Connect your computer with HDMI cable. HDMI2 port Connect your computer with HDMI cable. -
Page 10: Monitor Specifications
Response time 5 ms typical (G to G) Color depth 16.7 million colors Color gamut CIE 1976 (84%), CIE 1931 (72%), >99% sRGB Dell display manager compatibility Connectivity 2xHDMI 1.4 (HDCP) Border width (edge of 5.3 mm (Top) 6.7 mm (Top) monitor to active area) 5.3 mm (Left/Right) -
Page 11: Resolution Specifications
Resolution specifications Model S2419H/S2419HN/ S2719H/S2719HN/ S2419NX S2719NX Horizontal scan range 31 kHz to 83 kHz 31 kHz to 83 kHz (automatic) (automatic) Vertical scan range 56 Hz to 76 Hz (automatic) 56 Hz to 76 Hz (automatic) Maximum preset resolution 1920 x 1080 at 60 Hz for 1920 x 1080 at 60 Hz for HDMI 1.4 (HDCP) port. -
Page 12: Electrical Specifications
Electrical specifications Model S2419H/S2419HN/S2419NX/S2719H/S2719HN/ S2719NX Video input signals HDMI 1.4 (HDCP), 600mV for each differential line, 100 ohm input impedance per differential pair AC/DC Input voltage/ Delta adapter ADP-40DD B: 100 VAC to 240 VAC/50 Adapter frequency/current Hz to 60 Hz ± 3 Hz/1.5 A (Max.). - Page 13 Model S2719H/S2719HN/S2719NX Signal cable type Digital: detachable, HDMI, 19 pins Front-frame gloss (minimum) Black frame - 85 gloss units Dimensions (with stand) Height 454.6 mm (17.9 in) Width 612.7 mm (24.12 in) Depth 186.7 mm (7.35 in) Dimensions (without stand) Height 356.5 mm (14.04 in) Width...
-
Page 14: Environmental Characteristics
Environmental characteristics Model S2419H S2419HN/ S2719H S2719HN/ S2419NX S2719NX Temperature Operating 0°C to 40°C (32°F to 104°F) Non-operating ∞ Storage: -20°C to 60°C (-4°F to 140°F) ∞ Shipping: -20°C to 60°C (-4°F to 140°F) Humidity Operating 10% to 80% (non-condensing) Non-operating ∞... -
Page 15: Power Management Modes
The following table shows the power consumption and signaling of this automatic power saving feature. * Zero power consumption in off mode can only be achieved by disconnecting the power cable from the monitor. S2419H VESA Horizontal Vertical Video... - Page 16 S2719H VESA Horizontal Vertical Video Power Power Modes Sync Sync Indicator Consumption Normal Active Active Active White 36 W (maximum) operation 26 W (typical) Active-off Inactive Inactive Blanked White Less than 0.3 W mode (Glowing ) Switch off Less than 0.3 W Energy Star Power Consumption 20 W...
- Page 17 Dell P2418HZ Dell 24 Monitor No HDMI1 signal from your device. Press any key on the keyboard or move the mouse to wake it up. If there is no display, press the monitor button again to select the correct input source.
-
Page 18: Pin Assignments
Pin assignments HDMI connector Pin Number 19-pin Side of the Connected Signal Cable TMDS DATA 2+ TMDS DATA 2 SHIELD TMDS DATA 2- TMDS DATA 1+ TMDS DATA 1 SHIELD TMDS DATA 1- TMDS DATA 0+ TMDS DATA 0 SHIELD TMDS DATA 0- TMDS CLOCK+ TMDS CLOCK SHIELD... -
Page 19: Plug And Play Capability
During the LCD Monitor manufacturing process, it is not uncommon for one or more pixels to become fixed in an unchanging state which are hard to see and do not affect the display quality or usability. For more information on Dell Monitor Quality and Pixel Policy, see Dell Support site at www.dell.com/support/monitors. -
Page 20: Setting Up The Monitor
Setting up the monitor Connecting the stand NOTE: The stand is detached when the monitor is shipped from the factory. NOTE: This is applicable for a monitor with a stand. When any other stand is bought, please refer to the respective stand setup guide for the set up instructions. - Page 21 4. Inserting the stand until the snap locked. Setting up the monitor...
-
Page 22: Connecting Your Monitor
Connecting your monitor WARNING: Before you begin any of the procedures in this section, follow the Safety Instructions. NOTE: Do not connect all cables to the computer at the same time. It is recommend to route the cables through the cable-management slot before you connect them to the monitor. -
Page 23: Organizing Cables
Organizing cables Use the cable-management slot to organize the cables connected to your monitor. Removing the stand NOTE: To prevent scratches on the LCD screen while removing the stand, ensure that the monitor is placed on a soft and clean surface. NOTE: This is applicable for a monitor with a stand. - Page 24 3. Use a long screwdriver to press on the release button. 4. While pressing on the release button, pull the stand out. Setting up the monitor...
-
Page 25: Operating Your Monitor
Operating your monitor Power on the monitor Press the button to turn on the monitor. Using the control buttons Use the control buttons on the bottom of the monitor to adjust the image being displayed. Control buttons The following table describes the control buttons: Control Buttons Description Use this button to choose from a list of preset modes. -
Page 26: Osd Controls
Use the buttons to adjust the volume. Minimum is ‘0’ (-). Maximum is ‘100’ (+). Shortcut key/Input Source Use the Menu button to launch the On-Screen Display (OSD) and select the OSD Menu. See Accessing the menu. Menu Use this button to go back to the main menu or exit the OSD main menu. -
Page 27: Using The On-Screen Display (Osd) Menu
OSD menu, or wait for the OSD menu to automatically close. 1. Press the button to display the OSD main menu. Main Menu for HDMI input Dell 24 Monitor Dell 27 Monitor Brightness / Contrast Brightness / Contrast... - Page 28 Icon Menu and Description Submenus Brightness/ Use this menu to activate brightness/contrast adjustment. Contrast Dell 24 Monitor Dell 27 Monitor Brightness / Contrast Brightness / Contrast Input Source Input Source Color Color Display Display Audio Audio Menu Menu Personalize Personalize...
- Page 29 Color Use color to adjust the color setting mode. Dell 24 Monitor Dell 27 Monitor Brightness / Contrast Preset Modes Brightness / Contrast Preset Modes Standard Standard Input Source Input Color Format Input Source Input Color Format Color Color Reset Color...
- Page 30 ∞ RGB: Select this option if your monitor is connected to a computer or DVD player using the HDMI cable. ∞ YPbPr: Select this option if your DVD player supports only YPbPr output. Dell 24 Monitor Dell 27 Monitor Brightness / Contrast Preset Modes...
- Page 31 Display Use the display to adjust image. Dell 24 Monitor Dell 27 Monitor Brightness / Contrast Aspect Ratio Wide 16:9 Brightness / Contrast Aspect Ratio Wide 16:9 Input Source Sharpness Input Source Sharpness Color Dynamic Contrast Color Dynamic Contrast Display...
- Page 32 Menu Select this option to adjust the settings of the OSD, such as, the languages of the OSD, the amount of time the menu remains on screen and so on. Dell 24 Monitor Dell 27 Monitor Brightness / Contrast Language...
- Page 33 Others Dell 24 Monitor Dell 27 Monitor Brightness / Contrast Brightness / Contrast Display Info Display Info Input Source Input Source DDC/CI DDC/CI Color LCD Conditioning Color LCD Conditioning Display Firmware 13C102 Display Firmware 13C102 Audio Service Tag 8G1NDM2 Audio...
-
Page 34: Osd Warning Messages
OSD warning messages When the Dynamic Contrast feature is enabled (in these preset modes: Game or Movie), the manual brightness adjustment is disabled. Dell 24 Monitor To allow manual adjustment of brightness, the Dynamic Contrast will be switched off. Do you want to continue? - Page 35 When the monitor enters the Power Save Mode, the following message appears: Dell P2418HZ Dell 24 Monitor Entering Power Save Mode. S2419H Dell P2418HZ Dell 27 Monitor Entering Power Save Mode. S2719H If HDMI cable is not connected, a floating dialog box as shown below appears. The monitor will enter Power Save Mode after 4 minutes if left at this state.
-
Page 36: Setting Up Your Monitor
If you do not see 1920 x 1080 as an option, you may need to update your graphics driver. Depending on your computer, complete one of the following procedures: If you have a Dell desktop or portable computer: Go to www.dell.com/support, enter your computer’s Service Tag, and download ∞ the latest driver for your graphics card. -
Page 37: Internet Access
2. After installing the drivers for your graphics adapter, attempt to set the resolution to 1920 x 1080 again. NOTE: If you are unable to set the resolution to 1920 x 1080, please contact Dell to inquire about a graphics adapter that supports these resolutions. -
Page 38: Using Tilt
Using tilt NOTE: The stand is detached when the monitor is shipped from the factory. 21° 5° Operating your monitor... -
Page 39: Troubleshooting
If the monitor is working correctly, it detects that there is no signal and one of the following message appears. While in self-test mode, the power LED remains white. Dell P2418HZ Dell 24 Monitor No HDMI1 Cable The display will go into Power Save Mode in 4 minutes. -
Page 40: Built-In Diagnostics
Built-in diagnostics Your monitor has a built-in diagnostic tool that helps you determine if any screen abnormality you experience is an inherent problem with your monitor, or with your computer and video card. NOTE: You can run the built-in diagnostics only when the video cable is unplugged and the monitor is in self-test mode. -
Page 41: Common Problems
Missing Pixels ∞ Cycle power On-Off. ∞ Pixel that is permanently Off is a natural defect that can occur in LCD technology. ∞ For more information on Dell Monitor Quality and Pixel Policy, see Dell Support site at: www.dell.com/support/monitors. Stuck-on Pixels ∞... - Page 42 ∞ Restart the computer in the safe mode. Safety Related Issues ∞ Do not perform any troubleshooting steps. ∞ Contact Dell immediately. Intermittent Problems ∞ Ensure that the video cable connecting the monitor to the computer is connected properly and is secure.
-
Page 43: Product-Specific Problems
Product-specific problems Specific Symptoms Possible Solutions Screen image is too ∞ Check the Aspect Ratio setting in the Display settings OSD. small ∞ Reset the monitor to Factory Settings (Factory Reset). Cannot adjust the ∞ Turn Off the monitor, unplug the power cord, plug it back, and then monitor with the turn On the monitor. -
Page 44: Appendix
For customers in the United States, call 800-WWW-DELL (800-999-3355). NOTE: If you do not have an active Internet connection, you can find contact information on your purchase invoice, packing slip, bill, or Dell product catalog. Dell provides several online and telephone-based support and service options.