Table of Contents
Advertisement
451.4 MHz and a receive frequency of 456.4 MHz. Your own LN frequencies must be set according to
your user license.
% set interfaces interface LnRadio ln-config device-mode access-point network-name MyNetwork
tx-frequency 451.4 rx-frequency 456.4
% show interfaces interface LnRadio ln-config | details
radio-mode
device-mode
network-name
data-compression
header-compression
power
tx-frequency
rx-frequency
channel
modulation
fec
security {
security-mode
encryption
}
advanced-config {
data-retries
packet-ttl
remote-age-time
endpoint-age-time
allow-retransmit
arp-cache
qam16-threshold
qam64-threshold
}
Security configuration
The default security mode, as shown above, is none.
The following configures the LN module to use pre-shared key authentication with the passphrase
'mypassphrase' and aes256-ccm encryption.
NOTE
When viewing the configuration, the passphrase that you entered is not displayed in plaintext.
This is a security measure.
% set interfaces interface LnRadio ln-config security encryption aes256-ccm security-mode
psk passphrase mypassphrase
% show interfaces interface LnRadio ln-config | details
radio-mode
device-mode
network-name
data-compression
header-compression
power
tx-frequency
rx-frequency
channel
138
standard;
access-point;
MyNetwork;
lzo;
true;
40;
451.4;
456.4;
12.5KHz-9.6ksps;
automatic;
false;
none;
none;
3;
600;
600;
300;
true;
false;
-85;
-70;
standard;
access-point;
MyNetwork;
lzo;
true;
40;
451.4;
456.4;
12.5KHz-9.6ksps;
MDS Orbit MCR/ECR Technical Manual
MDS 05-6632A01, Rev. F
Advertisement
Table of Contents
Troubleshooting
