Related Manuals for Mitsubishi Electric DX-TL4716U
Summary of Contents for Mitsubishi Electric DX-TL4716U
- Page 1 DIGITAL RECORDER USERʼS MANUAL MODEL DX-TL4716U THIS INSTRUCTION MANUAL IS IMPORTANT TO YOU. PLEASE READ IT BEFORE USING YOUR DIGITAL RECORDER.
- Page 2 WARNING: REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: TO PREVENT ELECTRIC SHOCK DO NOT USE THIS (POLARIZED) PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.
- Page 3 AVERTISSEMENT: La fl èche symbolisant l’éclair dans un triangle équilateral a pour objet de tirer l’attention de l’utilisateur sur le fait, qu’ il y a des “tensions dangereuses” non-isolées à l’intérieur de l’enceinte du produit qui peuvent être suffi samment importantes pour conduire au risque d’électrocution.
-
Page 4: Important Safeguards
Important safeguards PLEASE READ ALL THESE INSTRUCTIONS REGARDING YOUR RECORDER AND RETAIN FOR FUTURE REFERENCE. FOLLOW ALL WARNINGS AND INSTRUCTIONS MARKED ON THE RECORDER. Read Instructions All the safety and operating instructions should be read before the appliance is operated. Retain Instructions The safety and operating instructions should be retained for future reference. - Page 5 16. Servicing Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. servicing to qualifi ed service personnel. 17. Damage requiring Service Unplug this product from the wall outlet and refer servicing to qualifi...
-
Page 6: Caution And Care
Caution and care HEAVY OBJECTS SHOULD NEVER BE PLACED ON THE UNIT (E.G., MONITOR) NEVER REMOVE THE TOP COVER AND TOUCH OR INSERT ANY OBJECT INSIDE THE UNIT Touching the inside of the cabinet or inserting foreign objects of any kind through the disc loading slot or ventilation holes not only creates a safety hazard but can also cause extensive damage. - Page 7 WARNING: The supplied power cord is used for 120 V only. Never connect to any outlet or power supply having a different voltage or frequency. Notice about construction of the surveillance system using this unit • This unit can be controlled by the external devices via RS-232C terminal or LAN terminal. This unit can also be used to control external devices via external terminal, RS-422/485 terminal, or RS-232C terminal.
- Page 8 Caution and care (continued) INSTALLATION LOCATION AND HANDLING • Place this unit horizontally and in a stable place. If this unit is not placed correctly and used in an unstable place, the unit may be damaged such as removal of the DVD/CD disc. •...
-
Page 9: Table Of Contents
Contents Important safeguards ... i Caution and care ... 2 Contents ... 5 Note ... 6 Software License Agreement ... 7 How to set the menus ... 8 Setting the menus ... 8 Setting the menu using a mouse ... 8 Setting the menu using the front panel buttons ... -
Page 10: Note
Note Thank you for purchasing Mitsubishi digital recorder DX-TL4716U (hereinafter referred to as “ Product ” ). Before using this Product, please be sure to read the following Software License Agreement with regard to the software contained in this Product (hereinafter referred to as “ Licensed Software ” ). By using this Product, you are agreeing to be bound by the terms and conditions of the following Software License Agreement. -
Page 11: Software License Agreement
Software License Agreement This Software License Agreement (“Agreement”) is an agreement between you (“User”) and Mitsubishi Electric Corporation (“Licensor”) with regard to the license to use Licensed Software. Article 1 (Grant of license) Licensor hereby grants to User a nonexclusive, nontransferable license to use Licensed Software. Article 2 (License) 1. -
Page 12: How To Set The Menus
How to set the menus Setting the menus The operations of this unit can be set via a menu displayed on OUTPUT A monitor. You can select and set the menu by using the buttons on the front panel or using a USB mouse connected to the unit. When using the front panel buttons, the numbers 1-16 (camera number buttons) and letters A to E (SPLIT screen buttons) represent the GUI button of the menu screen. -
Page 13: Displaying A Menu Screen
Displaying a menu screen User Menu Search Copy Information Protect Data PTZ Control Closing a menu screen Setup Menu Recording Timer Motion Det Menu Data System Selecting an item Exit Reset to Factory Setting On Screen Display Setting Multiplexer Setting Password Setting Rear Terminal Setting Setup Menu... -
Page 14: Inputting Numbers
How to set the menus (continued) Inputting numbers Number input area Time Date Setting Time Date Setting 0 1 - 0 1 Set time and date. Day Light Saving Setting Setting parameters Time Date Setting Time Date Setting 0 1 - 0 1 Set time and date. -
Page 15: Symbols In The Menus
Symbols in the menus Motion Search (Main - Normal) Camera Select Search Start Position 0 1 - 0 1 Setup date search starts from. Motion Detection Settings Next > Same as Recording Setting Motion A Search Some symbols appear in the menu screens. The meanings are as follows. (Help) When you press the HELP button or click this symbol, the detailed information on the menu appears. -
Page 16: Setting The Time And Date
Setting the time and date Time/Date Setting This function is used to set the present date, time, and auto daylight saving. Auto daylight saving function is used to auto- matically gain an hour for the specifi ed time period. Start/end time of the auto daylight savings can be checked and if needed, changed. -
Page 17: Using The Basic Multiplexer Functions
Using the basic multiplexer functions Basic multiplexer functions This function is used to activate multiplexer functions using the buttons on the front panel. DIGITAL ZOOM button Camera number buttons SPLIT screen buttons SEQUENCE button OUTPUT A/B button Move buttons Multiplexer buttons 1. -
Page 18: Controlling The Camera
Controlling the camera This function is used to control the cameras connected via RS-232C or RS-422/485 terminal. PTZ control using the menu User Menu PTZ Control Go to PTZ Control Zoom, iris, focus adjustment, AutoPan Preset Select PTZ Camera 1. Pan or tilt the PTZ camera connected. step •... -
Page 19: Recording The Picture Manually
Recording the picture manually Basic manual recording This function is to setup the recording parameters of recording setting pattern A to start recording manually. Ensure all the cameras are connected and time and date has been set correctly. Before you start recording, check the repeat recording settings in the <Data Management Setting for Main Memory>... -
Page 20: Playing Back The Recorded Data
Playing back the recorded data Basic playback This function is used to playback recorded data. This unit allows recorded data to be played back using various methods. The basic playback described below is the most common method for playback. 1. Press the PLAY button inside of the front door. step •... -
Page 21: Searching The Desired Picture
Searching the desired picture Basic search This function is used to search the start point of needed picture. This unit is equipped with 5 search functions (Search by Time and Date, Search by Alarm List, Find data storage location, Search by Book Mark, and Search by Motion). In this section, the common search methods, search by time and date and search by alarm list, are described. -
Page 22: Search By Alarm List
Searching the desired picture (continued) Search by Alarm List This unit stores the start time of alarm recording and emergency recording in the alarm list when such recording begins. This item is used to search the desired picture using the list of alarm recording (emergency recording). The search result displays in still frame playback of the single screen display. -
Page 23: Copying The Recorded Data
Copying the recorded data This item is used to copy the data to a copy device. Copy Data to Copy 1 Drive/Set Copy 1 Drive This item is used to copy the data to Copy 1 device by speci- fying the start and end points. The points are specified by the date and time or the bookmark. -
Page 24: Copy Data To Copy 2 Drive/Set Copy 2 Drive
Copying the recorded data (continued) Copy Data to Copy 2 Drive/Set Copy 2 Drive Copy 2 is a backup or archive feature. This item is used to copy the data to Copy 2 device by specifying only the start point. The point is specifi ed by the date and time or the book- mark. -
Page 25: Copying The Data Of This Unit To A Video Cassette
Copying the data of this unit to a video cassette This function is used to copy the data of this unit to a video cassette using an analogue video cassette recorder. Data can be copied even when the unit is in recording. For the recording operation, see the instruction manual for the ana- logue video cassette recorder used. -
Page 26: Playback Software
Copying the recorded data (continued) Playback software When copying the data to CD/DVD or USB memory, the needed PC playback software is automatically copied on to the disc. Refer to the following for using the software. System requirements • OS: Microsoft Windows 2000 or Windows XP. •... -
Page 27: File Menu
In synchronized audio playback, the frequency of picture refreshing is reduced depending on the processing power of PC. When you want to playback giving priority to picture, select [Not Synchro.]. The settings on this panel remain intact for the next start- Audio playback channel and picture display channel are not related. -
Page 28: Communications By Web Browser
Communications by Web Browser Communications by Web Browser The Web browser on the personal computer can display the live video and the pictures that have been recorded from the camera that is connected to this recorder. Also, some of the recorder settings can be made via the personal computer. -
Page 29: Main Menu
. (If you make an error in entering the user ID or step password • • • ) • The “[Caution]” screen appears. . Select “Login” and either left-click or press ENTER. step • The “[Login]” screen appears. . Follow step 2-1 and enter the correct “User ID” and step “Password.”... -
Page 30: Live Monitoring
Communications by Web Browser (continued) Live Monitoring Displays live video on the PC screen. 1. Select “Live Monitoring” and left-click. step • The “[Live]” screen appears. When video retrieval via web browser is tried for the fi rst time, a message as shown below may be displayed. If it is displayed, click “Yes.”... -
Page 31: Playback
Playback Retrieves, plays back and searches for pictures that have been recorded by the recorder. 1. Select “Playback” and left-click. step • The “[Playback]” screen appears. 2. Press the button. step • Playback starts. <Function description> : Press to start playback. : Press to start speed search in the forward direc- tion at speeds of x2, x4, x8 and x16. -
Page 32: Confi Guration Menu
Communications by Web Browser (continued) Alarm List Search Click “Alarm List” and the “Alarm List Search” screen appears in the sub-screen. 1. Set the desired date/time and number of alarm list step items to be acquired, and then click “Refresh” to acquire the alarm list. -
Page 33: User Registration
User Registration This is the screen for changing the settings for registered user authorization, and for deleting a registration. It can also be used for registering new users. 1. Select “User Registration” and left-click. step • The “[User Registration]” screen appears. . -
Page 34: Recorder Title & Camera Titles
Communications by Web Browser (continued) Recorder Title & Camera Titles This is the screen for setting or changing the recorder and the camera titles. 1. Select “Recorder Title & Camera Titles” and left- step click. • The “[Recorder Title & Camera Titles]” screen appears. - Page 35 To view the attached picture: In the PC with supplied application software installed, click or double click the fi le. In the PC without supplied application software installed, drag the fi le and drop it into the “MPicViewer.exe” which is stored in the supplied CD. The displayed picture can be printed or can be saved in general image formats.
-
Page 36: Access Mode Setup
Communications by Web Browser (continued) Access Mode Setup This is the screen for changing the SSL settings. 1. Select the item to be changed in the “Access Mode step Setup.” • Use SSL for Web Access: Sets the level of the encoding function (SSL). “No SSL”: Does not use the encoding function. -
Page 37: Logout
Logout In this screen, assign “Logout” settings to end the job. 1. Select “Logout” and left-click. step • The “[Logout]” screen appears. 2. Close the Web Browser. step If the browser is closed incorrectly (not logging out cor- rectly), the user’s session ID is saved for 5 minutes. If the Log in is made with the same user ID within that 5 min- utes, operation limits may take effect. -
Page 38: Troubleshooting
Troubleshooting If problems with the unit persist even after you’ve followed the suggestions below, disconnect the power cord and contact the retailer from whom you purchased the unit. Description of problem The unit does not be turned Power is on, but the unit does not operate. - Page 39 Description of problem Consult the following The unit does not perform • Is the LOCK indicator light on? playback. • Has the data been erased? • Is the correct playback device selected? The copy device dose not • Has the recording medium been inserted correctly into the unit? respond.
-
Page 40: Warnings And Call Out Output
Warnings and CALL OUT output Warnings and their appropriate countermeasures #1 Options in the CALL OUT output column: • Selectable: Selects to output CALL OUT signal or not on the menu screen. • Fixed: Outputs CALL OUT signal from the CALL OUT terminal regardless of the menu setting. •... - Page 41 Warning Display No Camera Signal Camera signal is lost or distorted. Please check the camera and cable connection. It can use as it is though a slight error occurred. System suspended due to unstable processing. Recording will be resumed. was disconnected. System suspended due to unstable processing.
- Page 44 PRINTED IN MALAYSIA...