Led Test; Line Key - Siemens optiPoint 410 entry Administrator's Manual
Hipath 8000
sylantro
broadsoft
Hide thumbs
Also See for optiPoint 410 entry:
- Information and important operating procedures (100 pages) ,
- Operating instructions manual (78 pages) ,
- Information and important operating procedures (35 pages)
Table of Contents
Advertisement
Alphabetical Reference
LED test
•
•
! page 95
Line key
Basic terminology
Call Appearance
Multi-Call Appearance
Function key
Keyset
Line
Line Appearance
Line key
Consultation hold
Manual hold
Private line type
196
Run this test to check the function of the ! LEDs at the optiPoint 410/
420 family S V6.0.
During the test all LEDs are flashing. The
! page 140
The standard optiPoint 410/420 family S V6.0
single line device supports 2 call instances per
line. When the line is idle there will be no call in-
stances.
In contrast an analogue wired line only supports
a single Call Appearance at a time.
[Future] Support of multiple line keys associated
with the same Address of Record (AoR) on a sin-
gle optiPoint 410/420 family S V6.0.
Example: AoR of the primary line appears on
multiple line keys on a single device.
A key on the optiPoint 410/420 family S V6.0
phone that may be logically associated with a
supported function ! page 188.
A phone where all lines are represented by a
line key plus an LED. Every keyset will have a pri-
mary line and may have secondary or phantom
lines. 10 Line keys can be configured for a key-
set.
A representation of a valid SIP AoR (Address of
Record). A line is the context for connecting SIP
calls. A line may support one or more calls.
A line (Directory Number) that appears on one or
more Keyset devices as a primary line (currently
only one device per primary line), secondary
Line or phantom line.
A function key that is used to represent a line
appearance (or, in the future, call appearance on
a line).
A form of hold which is private to the holding
keyset.
A form of hold which is accessible to any keyset
on the same shared line.
A line that only is accessed by one SIP endpoint,
i.e. it is exclusively owned.
:
key terminates the test.
- Quick Links:
- Operating the Telephone
Hide quick links:
Advertisement
Table of Contents
