Table of Contents
Advertisement
show rft profile
show rft profile {all|antenna-connectivity|link-quality|raw}
Description
Show parameters for the predefined RF test profiles.
Syntax
Parameter
all
antenna-connectivity
link-quality
raw
Usage guidelines
The
rft
command is used for RF troubleshooting, and should only be used under the supervision of Dell technical
support. Issue the show rft profile command to view the profiles used for these RF tests.
Example
The following example shows the testing parameters for the predefined link-quality RF test profile.
(host) #show rft profile link-quality
Profile LinkQuality: Built-in profile
--------------------------------------
Parameter
---------
Antenna
Frame Type
Num Packets
Packet Size
Num Retries
Data Rate
Related Commands
To view the results of an RF test, use the command
Command History
This command was available in ArubaOS 3.0.
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Description
Show all predefined profiles.
Show configured parameters for the predefined Antenna Connectivity test profile.
Show configured parameters for the predefined Link Quality test profile.
Show configured parameters for the predefined RAW test profile.
Value
-----
1 and/or 2
Null Data
100 for each data-rate
1500
0
All rates are tried
show rft
result.
show rft profile | 1247
Advertisement
Table of Contents
