GE JB690 Owner's Manual page 29
Self-cleaning radiant
Hide thumbs
Also See for JB690:
- Owner's manual (40 pages) ,
- Owner's manual (28 pages) ,
- Owner's manual (20 pages)
Table of Contents
Advertisement
Cleaning the glass cooktop,
ge com
Clean yourcooktop after
each spill. Use CERAMA
BRYTE ® CeramicCooktop
Cleaner.
Normal Daily Use Cleaning
ONLY use CERAMA BRYTE®Ceramic
Cooktop Cleaner on the ,glasscooktop.
Other creams may not be as eft_ctive.
To maintain and protect the surface of
your ,glasscooktop, follow these steps:
%
Before using the cooktop for the
filSt time, clean it with CERAMA
BRYTE®Ceramic Cooktop CleaneL
This helps protect the top and
makes cleanup e_tsieL
[_
Daily use of CERAMA BRYTE®
Ceramic Cooktop Cleaner will help
keep the cooktop looking new.
%
Shake the cleaning cream well.
Apply a few drops of CERAMA
BRYTE® Ceramic Cooktop Cleaner
directly to the cooktop.
[]
Use a paper towel or CERAMA
BRYTE® Cleaning Pad for Ceramic
Cooktops to clean the entire
cooktop surface.
[_]
Use a dxy cloth or paper towel
to remove all cleaning
residue.
No need to rinse.
NOTE:It is very importantthat youDONOT
heat the cooktopuntil it hasbeencleaned
thoroughly.
Use a CERAMA BRYT£_ Cleaning
Pad for Ceramic Cooktops.
Burned-On Residue
WARNING:DAMAGE to yourglass surface
may occurif you usescrubpadsother than
thoserecommended.
[_
Allow the cooktop to cool.
[_
Spread a few drops of CERAMA
BRYTE®Ceramic Cooktop Cleaner
on the entire burned residue area.
%
Using the included
CERAMA
®
BRYTE Cleaning Pad for Ceramic
Cooktops, rub the residue area,
applying
pressure as needed.
If any residue remains, repeat the
steps listed above as needed.
Fox additional
protection,
after
all residue
has been
removed,
polish
the entire
surface
with
CERAMA
BRYTE ® Ceramic
Cooktop
Cleaner
and a paper towel.
The CERAMABRYTE C_ Ceramic
Cooktop Scraper and all
recommended supplies are
available through our Parts Center.
See instructions under "To Order
Parts" section on next page.
NOTE:Do not use a dull or
nicked blade.
Heavy, Burned-On Residue
Allow the cooktop
to cool.
Use a single-edge
razor blade
scraper at approximately
a 45 °
angle against the glass surface
and scrape the soil. It will be
necessary to apply pressure to
the razor scraper in order to
xemove the xesidue.
%
At_ex scraping with the razor
scraper, spread a few drops of
CERAMA BRYTE® Ceramic
Cookmp Cleaner on the entire
burned residue area. Use the
CERAMA BRYTE® Cleaning Pad to
remove any
remaining
residue.
Fox additional
protection,
after all residue
has been
removed,
polish
the en6re
surface
with CERAMA
BRYTE ®
Ceramic
Cooktop
Cleaner
and a paper
towel.
29
Advertisement
Table of Contents
