Table of Contents
Advertisement
Steps
1. Slide and install the hard-drive into the hard-drive bracket.
2. Install the four (M3x3) screws to secure the hard drive to the hard-drive bracket.
3. Connect the interposer to the hard drive.
4. Align and place the hard-drive assembly on to the palm-rest and keyboard assembly.
5. Replace the four (M2x3) screws to secure the hard drive assembly to the palm-rest.
6. Connect the hard drive cable to the system board and close the latch to secure the cable.
Next steps
1. Install the battery.
2. Install the
base
cover.
3. Exit
service
mode.
4. Install the
SD
card.
5. Follow the procedure in
after working inside your
computer.
Removing and installing components
37
Advertisement
Table of Contents
