Steps
1. Align and place the display bezel on the display assembly.
2. Starting from the top corner, press on the display bezel and work around the entire bezel until it clicks onto the display
assembly.
3. Press both the hinge caps of the display bezel until it clicks into place.
4. Replace the four screws (M2.5x3.8) to secure the display bezel to the display assembly.
5. Adhere the stickers on the screws that secure the display bezel.
NOTE:
A new set of stickers is included with replacement display bezel. When replacing the new display bezel, adhere
the new stickers over the screws once the screws have been secured.
Next steps
1. Install the
display
assembly.
2. Install the
WWAN card
3. Install the
base
cover.
4. Follow the procedure in
Display panel
Removing the display panel
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the
WWAN card
50
Removing and installing components
for systems enabled with 4G LTE.
After working inside your
Before working inside your
for systems enabled with 4G LTE.
computer.
computer.