Table of Contents
Advertisement
Bosch Motorsport
2 Hardware Details
2.1 Device Pinout and Connector
Pin #
1
2
3
4
5
6
7
8
9
Mating Connector: ASDD606-09SN
2.2 Recommended Antennas
Antennas used with the LTE 65 should be purchased from Bosch Motorsport or an Au-
thorized dealer. FCC and CE certifications are conditional on the type of antenna used.
Bosch Motorsport has performed testing to select the antennas with the best efficiency
for motorsport applications.
Two different in car antennas and one pit stand antenna are available from Bosch
Motorsport, see also Car Specific Antennas [} 8].
Recommended torque spec for the antenna connection: 4 in-lbs (0.45 Nm)
2.3 Mounting and Environmental Considerations
Operating Temperature ambient
Storage Temperature
Max Vibration
Sealing Tightness
*Vibration profile defined and available on the Bosch Motorsport Website.
2.4 Drawings
– A mechanical offer drawing is available in LTE 65 Offer Drawing [} 23].
– A pit box harness layout drawing and schematic is available in Pit Stand Harness
Drawing [} 24].
Description
Battery positive
RS232_RX
Reset
RS232_TX
Battery negative
ETH_RX+
ETH_RX-
ETH_TX+
ETH_TX-
Telemetry System LTE 65 Manual
-30 to 65°C
-30 to 85°C
MSD Vibration Profile 1*
IP67
Hardware Details | 2
7 / 28
Advertisement
Table of Contents
