16
en | System components/specifications
Supervision Feature
The SE3401 Point Tracking Transmitter can also be configured to transmit periodically when
there is no other activity to report its status and location to the Central Console.
Low Battery Reporting
When the Transmitter is tested, a special "low battery" message is included in the
transmission to the Central Console if the Transmitter's battery is in need of replacing. These
low battery alerts are logged at the Central Console.
2.5
RF3401 asset tracking transmitter
Features
–
–
–
–
–
–
–
–
–
Description
The RF3401 Point Transmitter features a supervised sensor loop and a magnetic reed switch.
Use the supervised sensor loop to monitor any device with a dry contact output. When used
with an external magnet assembly the RF3401 reed switch allows for quick and easy
installation on doors and windows.
2.6
SE88 panic transmitter
2017.08 | V2.18.1.0 | DOC
Supervised Sensor Loop (monitors any dry contact device)
Internal Reed Switch (used with magnet)
Supervisory Signal Every 65 Minutes
Complete Status, including Battery and Tamper Sent with Every Transmission
Compatible with all DS RF-TechTM Receivers @304 MHz
Factory Programmed Transmitter ID for Quick and Simple Transmitter Enrollment
Installer (or user) Replaceable Lithium Battery
Quick Install Mounting Base Plate Included
Cover Tamper
Training Manual
Security Escort
Robert Bosch (SEA) Pte Ltd