Chassis Enclosure & Ventilation Requirements
Enclosure Ventilation
If your enclosure has doors, they need to be of a type that allows at least 30% airflow through the
enclosure (front and back).
Enclosure Minimum Clearance
Leave a 14 cm (5.5 in.) minimum clearance on all vented sides of the computer which has ODD
configuration to permit the airflow required for proper ventilation. And for computer without ODD
configuration, it needs to leave a 10 cm (3.9 in.) minimum clearance on all vented sides.
Recommended Enclosure
Do not install your computer in an enclosure that does not allow airflow / dusty environment /
temperate over 35 degrees centigrade. Do not put any objects to directly block air-vent. This restricts
the airflow and impacts your computer's performance, possibly causing it to overheat.
Open Desk Minimum Clearance
If your computer is installed in a corner, on a desk, under a desk, or hang on wall by VESA mount,
leave at least 5.1 cm (2 in.) clearance from the back of the computer to the wall to permit the airflow
required for proper ventilation.
Regulatory and Environmental Compliance
Product related conformity assessment and regulatory authorizations including Product Safety,
Electromagnetic Compatibility (EMC), Ergonomics, and Communication Devices relevant to this
product may be viewed at www.dell.com/regulatory_compliance. The Regulatory Datasheet for this
product is located at http://www.dell.com/regulatory_compliance.
Details of Dell's environmental stewardship program to conserve product energy consumption, reduce
or eliminate materials for disposal, prolong product life span and provide effective and convenient
equipment recovery solutions may be viewed at www.dell.com/environment. Product related
conformity assessment, regulatory authorizations, and information encompassing Environmental,
Energy Consumption, Noise Emissions, Product Materials Information, Packaging, Batteries, and
Recycling relevant to this product may be viewed by clicking the Design for Environment link on the
webpage.
39